Packet Tracer Remote IoT Smart Office
Case Study: You have just joined Ingenious Design and Solutions as an IoT Network Design Engineer. Your first project is to setup an IoT Smart Office. Ingenious Design and Solutions has 2 offices. The main office is located in Sydney and the other at Bathurst. As a part of the project you are expected to create a smart office in Sydney with the criteria and devices given below.
The Main Smart Office at Sydney includes, but is not limited to the following smart devices all connected to the office wireless router:
- Ceiling Fan
- Windows (3 Numbers )
- Front Door
- Motion Detector
- Lawn Sprinkler System
- Smoke Detector
- Temperature Monitor
- Wind Speed Detector
The above smart devices are in the main office at Sydney. All the devices are connected through the office wireless router to the modem which in turn is connected to the Internet via the ISP Satras to the Remote Sever through the company's cloud cluster run by Sky servers. All the devices are registered on to the Remote Server. These devices should be controlled locally by a Tablet which is also connected to the wireless network.
Ensure that you add all necessary screenshots and embed your packet tracer file with the documentation to be presented to the manager for project approval.
Tasks:
Build and configure a smart office.
All screenshots for each step with a brief explanation must be included in the document. Once the Assignment is complete, the student must embed the packet tracer file in the word document as StudentID_Firstname_ITC560.pkt and display as an icon. The word document with all screenshots and packet tracer file should be submitted.
Sydney Smart Office Design:
1. Add, connect, enable and configure the registration server, tablet and wireless router as shown in Figure 1 below.
2 a. Add, configure the smart devices mentioned in the case study and name these as given in Figure 1 below. Note that these devices should be wirelessly connected to a wireless router and should be encrypted using AES by using WPA-PSK (the pass phrase must only be your student ID).
2 b. Connect and activate the devices with username and password (use your for both Student ID). This is to ensure a unique login to the smart network. This is one of the most important requirements of the client.
3. Set up all the smart device attributes through the tablet web browser for the devices to work as shown in Figure 1 below.
Figure 1: Sydney Smart Office
4. Show the protocols that are used in transmitting a simple PDU from the tablet to the remote server (by going to the simulation mode) and record all the protocols that are used for transmission of the simple PDU when the packet is:
- in progress; and
- successfully delivered.
Control Sydney office Smart IoT Devices from Bathurst Office:
Figure 2: Control Smart Devices in Sydney Office from Bathurst Office
5. Add a new branch office at Bathurst. Either, use the same tablet you used for control in the Sydney office or use your smart phone and connect to the Remote Server you have set up earlier. You can use any connecting and intermediary devices of your choice.
6. Log on to the web browser on your tablet/smart phone and manage the devices as given below. Using the same tablet or new smart phone:
- Turn off the Sprinkler
- Turn off the ceiling fan
- Lock the door
- Close Window1 and Window2 when the carbon monoxide or carbon dioxide levels outside go high
- Unlock Window3 when the CO2 level inside the office increases
- Turn on the smoke alarm
- Turn on the motion detector
- Turn on the wind detector
Attachment:- Smart Office.rar