Objective(s)

This assessment item relates to the unit learning outcomes as in the unit descriptors.
This checks your understanding about configuring and troubleshooting medium-size networks.

PART-1
IP Addressing:

1. Subnet the following IP network: 10.xy.0.0/20 (XY is the last two digits of your student id) to accommodate 5 subnets, each subnet will subsequently have 500, 120, 65, 30 and 15 PCs. For each subnet find the subnet mask, network ID, broadcast IP and valid host range. Place your subnetting plan here:

PART-2
Based on the given topology, complete the following tasks in packet tracer and paste screen shots in the word document.

2. Design IP plan for the network
3. Configure IP address for the PC and server
4. Configure OSPF for the network
5. Show the routing table of each router
6. Show the network connectivity pinging from PC0 to Server0

PART-3
You are hired by VIT to implement the network given in the diagram below.

The number of PCs and servers in different subnets are as follows: HQ Subnet: 130
Branch A Subnet: 100 Branch B Subnet: 60 Branch C Subnet: 10

The company has been allocated the following IPv4 address block to use: 172.1XY.0.0/23 (XY is the last two digits of your student ID).

To perform the task, you must prepare the following documents:

a. IPv4 addressing plan
b. Write down the configuration command in Branch B router to statically route all traffic to HQ router
c. Write down the configuration commands to enable IPv4 RIPv2 routing in HQ router.

Attachment:- Assignment.rar