Network design with configuration
Purpose of the assessment (with ULO Mapping) Main objectives of this assignment is to enable student to configure networking devices for a given business case study and understand limitations of a network design. After successful completion of this assignment, students should be able to:
a. Report on the health of existing internetworking architectures such as systems, solutions, data, applications, technology.
b. Discuss an appropriate network design and solutions for medium-sized organisations.
c. Report on the current and future state of the management of internetworking infrastructure and its applications.
d. Interpret a roadmap process to transform an internetworking architecture to support long-term business goals.
e. Apply a process to support the administration and the management of internetworking.
Assignment- Specification
Business case study: Network design proposal for airport
Description
Assignment 2 is an extension of assignment 1 work.
The project is to design a proposal for setting up a network in an airport. The airport has three departments.
1. Airport authority
2. Flight service providers
3. Guests
The airport authority maintains a server which handles the flight management controls. The flight service providers should have access only to the specific server in the airport authority network and not to any other systems. The guest users should have wireless access to a high speed internet connection, which should be shared among all the users in all the departments.
The wireless access should be using a common password. The guest users should not have access to the other two departments. The users should obtain IP addresses automatically. The airport authority has 20 users, the flight service providers have 40 users and the maximum numbers of guests are estimated to be 100.
Write a report with the following contents
- Detailed Network Design in Netsim (You should not use packet tracer) which includes
- Minimum of 2 switches
- Minimum of 3 routers
- VLAN
- VTP
- 2 PCs
- Network device configurations
a. Switch configuration:
- Set IP addresses on PC and switch
- Create VLAN
- Ping each other
- Set VTP domain with your first name
- Set VTP password with your family name
- Demonstrate VTP packets
b. Router configuration
- set descriptions on interfaces, one with your name, second with your family name, third with your middle name
- display information about directly connected devices to router
- Setup IP addresses for each interfaces
- What is the subnet mask did you use?
- Ping all 3 routers.
Demonstrate working of whole network.