Assignemnt: Telecom and Dist. Systems

Network Design and Implementation and Testing and Cost Estimation Using Cisco Packet Tracer

I) Use the following Network Diagram (Figure I -see Page 2) to design and implement your Cisco Packet Tracer Network.

II) You are to implement a Local Area Network in CPT for the High Tech Small Business Inc. as shown in the Diagram shown on page 2. Follow ALL directions given in the Network Diagram.

III) Use IP Address 151.31.0.0 as Class B IP Address for the entire Super Tech Business. Decide on IP Subnets and Subnet Mask to configure correct IP Addresses and Subnet Masks for ALL computers and servers and Tablets in the Diagram (see Figure next page) using CPT. You are to configure Routes using RIP Version 2 ONLY. You MUST use Serial (SE) Port connections when connecting the Four Routers with each other (see Diagram on Page 2).

IV) Part I requires you to complete the Network Design and Testing

V) Part II requires you to Add DHCP Server in Conference Room and Test for connectivity (see Directions in Diagram on page 2)

VI) You are then to test Network connectivity across your implemented Network using PING

VII) Deliverables as outline below.

Attachment:- Network-Design-Multiple-Routers-Route-Configuration.rar