1 When connecting multiple switches with redundant links, which of the following protocols helps to ensure that you will have a loop-free Ethernet network?
A) STP
B) HTTP
C) TCP
D) ARP
2 When STP has placed a port in the blocked state, this port ________.
A) Will receive and forward data frames only
B) Will receive data frames but cannot forward them
C) Will forward data frames but cannot receive them
D) Cannot receive or forward data frames
3 As the network engineer, you are configuring the Fast Ethernet interface. You have issued the following command to the fa0/0 interface: ip address 200.16.24.1 255.255.255.0.Which of the following must be true before the router can add this information to its routing table? (Choose two.)
A) The interface status codes for the interface must be in the up and up condition.
B) The interface must be administratively turned off.
C) The interface must have the no shutdown command issued.
D) The router must be able to communicate with its neighbor first.
4 What VLAN(s) should devices in the IP subnet be in?
A) Devices in a single VLAN should be in the same IP subnet.
B) Devices in different VLANs should be in separate IP subnets.
C) Devices in a single VLAN should be in separate IP subnets.
D) Devices in different VLANs should be in the same subnet if needed.
E) IP subnet and VLAN placement does not really matter.
5 In what two conditions does a router choose to process a frame? (Choose two.)
A) When the frame isn't marked Discard Eligible
B) When the frame source address is the same as the local address (Layer 2)
C) When the frame has no errors
D) When the frame destination address is the same as the local address (Layer 2)
6 What type of route adds the subnet to the routing table of a Cisco device when the ip address command is issued on an interface with a state of Up/Up?
A) Local route
B) Connected route
C) Static route
D) Interface route
7 What type of route adds the host to the routing table of a Cisco device when the ip address command is issued on an interface with a state of Up/Up?
A) Local route
B) Connected route
C) Static route
D) Interface route.