1. In a typical TCP connection establishment, the two flags used in the core handshake are the ___ and ___ flags.
2. TCP uses _____ to manage the transmission between senders and receivers that can send or receive differing rates to make sure not to overwhelm machines that may be slower.
3. The transport layer protocol used by the TCP / IP suite that does not provide guarantees on ordering or confirmation of receipt of packets is called
4. SMTP is a protocol for ....
a. email
b. network management
c. address resolution
d. name services
5. (see attached image "question5")
6. (refer to image "question5") If System 1 was sending data to System 3, when a packet left the router Interface 2, what would the source MAC address in the packet be at that point?
a. 00:00:00:00:00:01
b. 00:00:00:00:00:02
c. 00:00:00:00:00:03
d. 00:00:00:00:00:04
e. 00:00:00:00:00:05
7. Given a system with the following: IP Address: 10.10.2.34 Subnet Mask: 255.255.0.0 Gateway 10.10.2.1 Which (select all that apply) of the following addresses would be on the same local network?
a. 10.11.2.30
b. 10.10.23.62
c. 10.10.2.134
d. 192.168.1.1
e. 100.10.2.35
8. Short Answer: Describe how RIP operates. Why are there problems implementing RIP on large networks?
9. Short Answer: Describe the difference between bulk data flow and interactive data flow. Give examples of where each is used.
10. Short Answer: Describe the process of terminating a connection in TCP. Be sure to discuss specifics on why TCP uses the mechanism it does.