Ask Question, Ask an Expert

+1-415-315-9853

info@mywordsolution.com

Ask Electrical & Electronics Expert

1) a) prepare a brief note on the ‘Electronics Telephone’.

b) describe the functioning of  ‘Cordless Telephone’?

2) a) Discuss on ‘Cellular Telephone System’ in brief.

b) prepare comparisons between the ‘Analog’ and ‘Digital’ Cellular Telephone Systems.

3) a) describe the operating principle of ‘moving coil microphone’ with the help of suitable diagram.

b) prepare some of the comparisons between : Carbon and condenser Microphones.

4) a) describe the working principle of ‘unidirectional cardiod microphones With proper diagram’.

b) Briefly describe on ‘Horn type loudspeakers’ with appropriate diagram.

5) a) Describe the operation of basic monochrome television transmitter by giving suitable block diagram.

b) describe the operation of a picture tube with proper diagram.

6) a)prepare a brief note on the ‘Blanking Pulses’ of composite video signal with the help of sketch.

b) Specify the benefits of ‘HDTV’ and ‘Flat Screen TV’.

7) a) describe different parts of the satellite system with proper diagram.

b) prepare a brief note on the earth station subsystem and noise in the satellite Communication system.

8) a) describe what is CDMA system.

b) prepare some of the comparisons of TDMA and FDMA systems.

9) a) Describe the operation of Radar with the help of block diagram.

b) Deduce the Radar range equation.

10) a) describe the working principle of the MTI Radar.

b) Describe the operation of Pulsed Radar. describe in detail.

Electrical & Electronics, Engineering

  • Category:- Electrical & Electronics
  • Reference No.:- M912953

Have any Question? 


Related Questions in Electrical & Electronics

Assignmentbefore you start please read the following

Assignment Before you start please read the following instructions carefully. 1. This assignment forms part of the formal assessment for this module. If you fail to reach the required standard for the assignment then you ...

1 discuss how the solution for the electromagnetic field

1. Discuss how the solution for the electromagnetic field given by (4.52) corresponds to that of a uniform plane wave. 2. Why is the quantity known as the phase constant? 3. What is phase velocity? How is it related to t ...

1 what are the two types of firewalls2 what is a vpn and

1. What are the two types of firewalls? 2. What is a VPN and why is it needed? 3. How do LANs on a fully private internet communicate? 4. Host A and host B use IPSec in the transport mode. Can we say that the two hosts n ...

It is desired to strip trichloroethylene o2hcl3 from a

It is desired to strip trichloroethylene, O 2 HCl 3 , from a contaminated groundwater stream. The groundwater, which can be treated as a dilute water stream, will be fed to the top of the tower operating at 288 K and 1.0 ...

A signal is bandlimited to 12 khz the band between 10 and

A signal is bandlimited to 12 kHz. The band between 10 and 12 kHz has been so corrupted by excessive noise that the information in this band is nonrecoverable. Determine the minimum sampling rate for this signal so that ...

For a line charge of uniform density 10-3 cm situated along

For a line charge of uniform density 10 -3 C/m situated along the z-axis between (0, 0, -1) and (0, 0, 1), obtain the series expression for the electric potential at the point (0, y, 0) by dividing the line charge into 1 ...

A dc source supplies an inverter with bipolar pwm control

A DC source supplies an inverter with bipolar PWM control. The effective value of the output voltage on the fundamental frequency of 50 Hz is 220 V. The load is a serial R-L connection with a resistance R = 10 Ω and an i ...

A number equal to the sum of its coordinates is assigned to

A number equal to the sum of its coordinates is assigned to each point in a rectangular room having three of its contiguous edges as the coordinate axes. Draw a sketch of the constant-magnitude surfaces for the number fi ...

The strain energy and work done by applied loads are given

The strain energy and work done by applied loads are given in the following equations. When the solution is expressed by u(x) = c 1 x + c 2 x 2 , calculate the solution using the principle of minimum potential energy.

1 in which situation a unicast session or a multicast

1. In which situation, a unicast session or a multicast session, can feedback received from an RTCP packet about the session be handled more easily by the sender? 2. Can the combination of RTP/RTCP and SIP operate in a w ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

WalMart Identification of theory and critical discussion

Drawing on the prescribed text and/or relevant academic literature, produce a paper which discusses the nature of group

Section onea in an atwood machine suppose two objects of

SECTION ONE (a) In an Atwood Machine, suppose two objects of unequal mass are hung vertically over a frictionless

Part 1you work in hr for a company that operates a factory

Part 1: You work in HR for a company that operates a factory manufacturing fiberglass. There are several hundred empl

Details on advanced accounting paperthis paper is intended

DETAILS ON ADVANCED ACCOUNTING PAPER This paper is intended for students to apply the theoretical knowledge around ac

Create a provider database and related reports and queries

Create a provider database and related reports and queries to capture contact information for potential PC component pro