Ask Question, Ask an Expert

+1-415-315-9853

info@mywordsolution.com

Ask Electrical & Electronics Expert

1) prepare down the voltage levels that are used for binary 0 in RS232.

2) What do you understand by quasi – bidirectional port?

3) prepare down the different distinct physical address spaces.

4) prepare down the two possibilities when the ports are read.

5) prepare down the difference and similarities bertween CISC and RISC.

6) What do you mean by register file and mention its components?

7) Describe in detail UART and USART.

8) What do you understand by peripheral interfacing?

9) prepare down the advantages of distributed embedded system.

Electrical & Electronics, Engineering

  • Category:- Electrical & Electronics
  • Reference No.:- M912156

Have any Question? 


Related Questions in Electrical & Electronics

1 implement the 2-to-4 decoder using 7404 not an 7808 and

1. Implement the 2-to-4 decoder using 7404 (NOT) an 7808 (AND) chips on your breadboard. 2. Implement the 2-to-4 decoder circuit with a 74139 chip on your breadboard. 3. Implement a 1-to-2 decoder in Logisim. Implement t ...

1 obtain the equations for a one-dimensional steady viscous

1. Obtain the equations for a one-dimensional steady, viscous, compressible flow in the x direction from the Navier- Stokes equations. (These equations, together with an equation of state and the energy equation, may be ...

Question 1 design a suitable double -layer lap winding for

Question 1) Design a suitable double -layer lap winding for a 6-pole dc armature with 18 slots and two coil sides per slot. Give values of front-pitch, brack-pitch and commutator pitch. Draw the developed diagram and sho ...

Tasks1learn how to use opendss2open and execute the epri

Tasks 1. Learn how to use OpenDSS 2. Open and execute the EPRI Test Circuit 24 model 3. Develop base case data sets of bus voltages and power flows 4. Provide analysis of the base case model: a. Feeder voltage profiles b ...

1 what is a uniform plane wave2 why is the study of uniform

1. What is a uniform plane wave? 2. Why is the study of uniform plane waves important? 3. How is the surface current density vector defined? Distinguish it from the volume current density vector. 4. How do you find the c ...

You are to size a grid-connected south-facing pv system for

You are to size a grid-connected south-facing PV system for Las Vegas to deliver 4000 kWh/yr. Use a tilt equal to latitude minus 15°. a. What should be the ac-rated power of the PV/inverter system? b. What temperature de ...

Consider a deformation of a rectangular bar whose deformed

Consider a deformation of a rectangular bar whose deformed geometry is given as x 1 = αX 1 , x 2 = βX 2 , x 3 = βX 3 When the material is an incompressible Mooney-Rivlin hyperelastic material with A 10  = 80 MPa and A 01 ...

1 considering the second hand on your watch to be a vector

1. Considering the second hand on your watch to be a vector, state its polarization. What is the frequency? 2. What is a phasor? 3. Is there any relationship between a phasor and a vector? Explain. 4. Describe the phasor ...

1 what is meant by the dominant mode why are waveguides

1. What is meant by the dominant mode? Why are waveguides designed so that they propagate only the dominant mode? 2. Why is the dimension b of a rectangular waveguide generally chosen to be less than or equal to one-half ...

Audio amplifier multistageaudio amplifier power output

Audio Amplifier (Multistage) Audio Amplifier Power Output selection: 3.2 W, 5.6 W, 7.1 W, 8.4 W, 11.5 W, and 16.3 W Audio Amplifier Input Voltage (peak) selection: 150mVpeak, 200mVpeak, 250mVpeak Audio Frequency: 20 Hz - ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Section onea in an atwood machine suppose two objects of

SECTION ONE (a) In an Atwood Machine, suppose two objects of unequal mass are hung vertically over a frictionless

Part 1you work in hr for a company that operates a factory

Part 1: You work in HR for a company that operates a factory manufacturing fiberglass. There are several hundred empl

Details on advanced accounting paperthis paper is intended

DETAILS ON ADVANCED ACCOUNTING PAPER This paper is intended for students to apply the theoretical knowledge around ac

Create a provider database and related reports and queries

Create a provider database and related reports and queries to capture contact information for potential PC component pro

Describe what you learned about the impact of economic

Describe what you learned about the impact of economic, social, and demographic trends affecting the US labor environmen