Ask Question, Ask an Expert

+1-415-315-9853

info@mywordsolution.com

Ask Electrical & Electronics Expert

Essay problems:

problem 1: What is the principle of CRT (Cathode Ray Tube)?

problem 2: Describe about deflection and sensitivity and state about electrostatic and magnetic deflection?

problem 3: What are the applications of C.R.O?

problem 4: Describe about ammeter and voltmeter and also illustrate about the frequency measurement?
 
Objective problems:

problem 5: The electro static deflection sensivity of a CRO:

a) Deflection in meters on the screen per volt of deflecting voltage.
b) Deflection voltage per deflection in meters.
c) Product of deflection in meters and deflection in voltage.
d) None of the above.

problem 6: The electro static deflection sensivity is directly propotional to:

a) Final anode voltage.
b) space in between the deflection plate.
c) Length of the deflection plate.
d) both a and b.

problem 7: The electro static deflection sensivity is inversly propotional to:

a) Length of the deflection plate.
b) Distance between screen and the center of deflection plate.
c) Final anode voltage.
d) Both a and b.

problem 8: The magnetic deflection sensivity is inversely proportional to:

a) Anode voltage.
b) square root of the anode voltage.
c) cube of the anode voltage.
d) Square of the anode voltage.

problem 9: The coating material employed for green screen in CRT is:

a) Zinc ortho silicate.
b) Calcium tungstate.
c) Zinc sulphide.
d) Zinc cadmium sulphate.

problem 10: The coating material employed for blue screen in CRT is:

a) Zinc ortho silicate.
b) Calcium tungstate.
c) Zinc sulphide.
d) Zinc cadmium sulphate.

Electrical & Electronics, Engineering

  • Category:- Electrical & Electronics
  • Reference No.:- M93237

Have any Question? 


Related Questions in Electrical & Electronics

1 briefly outline the procedure involved in the successive

1. Briefly outline the procedure involved in the successive solution of Maxwell's equations. 2. How does the technique of successive solution of Maxwell's equations reveal the interaction between the electric and magneti ...

1 the dam shown below is 100 m wide determine the magnitude

1. The dam shown below is 100 m wide. Determine the magnitude and location of the force on the inclined surface. 2. The float in a toilet tank is a sphere of radius R and is made of a material with ρ. An upward buoyant f ...

For the euler beam element shown in the figure derive the

For the Euler beam element shown in the figure, derive the interpolation functions, N I (ξ), stiffness matrix, k, and nodal force vector, f. Assume that the uniformly distributed load is  f (x) = f. Note that the referen ...

1 two immiscible fluids of different density and viscosity

1. Two immiscible fluids of different density and viscosity are flowing between two parallel plates. Express the boundary conditions at the interface between the two fluids. 2. Determine the velocity profile for fluid fl ...

A 425-m315000 ft3 basin filled with wastewater is to be

A 425-m 3 (15,000 ft 3 ) basin filled with wastewater is to be aerated with 10 spargers, each sparger using air at the rate of 7:08 × 10 -3  m 2 /s. Find the time that is necessary to raise the dissolved oxygen level in ...

1 is the cutoff wavelength dependent on the dielectric in

1. Is the cutoff wavelength dependent on the dielectric in the waveguide? Is the cutoff frequency dependent on the dielectric in the waveguide? 2. What is guide wavelength? 3. Provide a physical explanation for the frequ ...

The size d of droplets produced by a liquid spray nozzle is

The size d of droplets produced by a liquid spray nozzle is thought to depend upon the nozzle diameter D, jet velocity V, and the properties of the liquid ρ, μ, and σ. Rewrite the relation in dimensionless form. Take D, ...

1what is an electric dipole how is its strength defined2

1.What is an electric dipole? How is its strength defined? 2. What are the different kinds of polarization in a dielectric? 3. What is the polarization vector? How is it related to the electric field intensity? 4. Discus ...

Consider the problem of identifying the nonlinear

Consider the problem of identifying the nonlinear discrete-time system in (9.9.4) using a raised-cosine RBF network. Let the number of past inputs be m = 1 and the number of past outputs be n = 1. Suppose the range of va ...

1 what is a uniform plane wave2 why is the study of uniform

1. What is a uniform plane wave? 2. Why is the study of uniform plane waves important? 3. How is the surface current density vector defined? Distinguish it from the volume current density vector. 4. How do you find the c ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Section onea in an atwood machine suppose two objects of

SECTION ONE (a) In an Atwood Machine, suppose two objects of unequal mass are hung vertically over a frictionless

Part 1you work in hr for a company that operates a factory

Part 1: You work in HR for a company that operates a factory manufacturing fiberglass. There are several hundred empl

Details on advanced accounting paperthis paper is intended

DETAILS ON ADVANCED ACCOUNTING PAPER This paper is intended for students to apply the theoretical knowledge around ac

Create a provider database and related reports and queries

Create a provider database and related reports and queries to capture contact information for potential PC component pro

Describe what you learned about the impact of economic

Describe what you learned about the impact of economic, social, and demographic trends affecting the US labor environmen