To increase the heat transfer from a wood burning stove fins are going to be attached to the metal chimney pipe. The fins will be 3 cm wide at the base and have a thickness of approximately 2mm. The surface temperature of the pipe is 500°C, and the surrounding air temperature is assumed to be a constant 25°C. Select a suitable material for the fins and also justify an appropriate length. The material and length should be based an attempted to maximize heat transfer and minimize cost. Assume a reasonable value for the convection heat transfer coefficient.

Finding will be presented in a report with a memo cover sheet. A narrative including an

Introduction, Analysis Methods, Results, and Conclusions needs to be provided.

Introduction: Describe the problem and reason for the design.

Analysis Methods: Describe the methods used to analyze the problem. Include equations used and any other tools used.

Results: Provide a dimensioned drawing of the design along with any results obtained from calculations or other analysis methods. Such as heat transfer rates, cost of materials and manufacturing, and payback period.

Conclusions: Provide a summary of the problem, analysis, and results. Lastly discuss the method used to manufacture and attach the fins.

Notes:

The report must be created in a word processing program.

All drawings must be created with a computer aided drafting program.