Ask Electrical & Electronics Expert

To do the basic laboratory experiments related to the electrical engineering course, students need to have some basic understanding about the measuring tools, apparatus, components, meters and fundamental laws to be implemented. For example, if someone wants to design a basic circuits of power supply, he/she must have the knowledge about the electronic components reading and the fundamental laws used to design the circuits and also the knowledge of measuring equipment. After learning the basic procedures done in this practical report, students can easily implement this basic knowledge into the future professional practice. Therefore, the basic purpose of doing this experiment is to learn the basic skills necessary for an electronic engineering student. In order to accomplish this report, students did three main experiments as follows,

1. Measuring equipment including the multimeter (Uni-Trend UT803, DIGITECH), signal generator (SG) (Goodwill GW GAG-809), digital storage oscilloscope (DSO) (RIGOL DS1062CA).

2. Basic measurement including the measuring of values of electronic components (resistors (R), capacitance (C),direct current/alternating current (DC/AC) voltages) and see the measurment on the DSO. Also the basic functionality of the oscilloscope. It also include the functioning of the SG.

3.  Complex measurement including the analysis of the current and power measurement in AC/DC circuits.

The detail of each experiment and measuring equipment will be provided in the next Section. From the above three steps, after accomplishing the first step of measuring equipments, student will be able to apply this knowledge in their future practice. For example, by using digital multimeter, students can easily measure the components values, AC/DC voltages and the grounding points. In this step, students did some excercises like measuring resistances, capacitances, DC/AC voltages and diode forward voltages. Similare excercises was done for the DSO and SG. The significane of the excercises is very high in increasing the students confidence level and practical skills.

Electrical & Electronics, Engineering

  • Category:- Electrical & Electronics
  • Reference No.:- M9523418

Have any Question?


Related Questions in Electrical & Electronics

Question 1for the ce amplifier in figure 1 given the

Question 1 For the CE amplifier in Figure (1), given the following component parameters: Parameter Value β DC , β AC 150 V BE 0 . 7 V V CC 12 V R C 820 ? R E 1 100 ? R E 2 220 ? R 1 20 k? R 2 5 . 2 k? R L 100 k? C 1 , C ...

Question -i a star-connected three-phase synchronous

Question - (i) A star-connected, three-phase synchronous induction motor takes a current of 10 amps from a 415 volt supply at unity power factor when supplying a steady load. If the synchronous reactance is 5 ohms/phase ...

1 a name the three major groups of contamination and

1. (a) Name the three major groups of contamination and briefly describe their physical characteristics. (b) Where do the above contamination types come from? Give one example of each. 2. Name two processes metrics which ...

Question 1 in the voltage regulator circuit in figure p221

Question 1: In the voltage regulator circuit in Figure P2.21, V 1 = 20 V, V Z = 10 V, R i = 222Ω and P z (max) = 400 mW. (a) Determine I L, I z , and I L , if R L = 380Ω. (b) Determine the value of R L , that will establ ...

Summative assessmentin 2017 sej101 assessment will consist

Summative Assessment In 2017 SEJ101 assessment will consist of nine tasks that will develop a portfolio of your assessed work. Throughout the trimester you will have the opportunity for feedback on all nine tasks before ...

1 a name the three major groups of contamination and

1. (a) Name the three major groups of contamination and briefly describe their physical characteristics. (b) Where do the above contamination types come from? Give one example of each. 2. Name two processes metrics which ...

1 a name the three major groups of contamination and

1. (a) Name the three major groups of contamination and briefly describe their physical characteristics. (b) Where do the above contamination types come from? Give one example of each. 2. Name two processes metrics which ...

Case studythis assignment consists of a written report of

CASE STUDY This assignment consists of a written report of approximately 1000 words and any diagrams in which you are asked to critically compare different process methods used to achieve the same result and show an awar ...

Problem 1 a two-phase servomotor has rated voltage applied

Problem 1: A two-phase servomotor has rated voltage applied to its excitation winding. The torque speed characteristic of the motor with Vc = 220 V, 60 Hz applied to its control phase winding is shown in Fig.1. The momen ...

Electrical engineering questions -q1 two ideal voltage

Electrical Engineering Questions - Q1. Two ideal voltage sources designated as machines 1 and 2 are connected, as shown in the figure below. Given E 1 = 65∠0 o V, E 2 = 65∠30 o V, Z = 3Ω. Determine if Machine 1 is genera ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As