Ask Question, Ask an Expert

+61-413 786 465

info@mywordsolution.com

Ask Mechanical Engineering Expert

The problem: -

Deaf blind people have a huge problem when crossing the streets. They always need assistance from a sighted person or a trained dog to cross the street. There is no device in the market now that can help them cross the street with no assistance.

Possible design: -

The devise will consist of two main parts. The first part is the FM or AM transmitter. The second part will be the FM or AM receiver. The FM or AM transmitter will be stationary and will be attached to small MP3 player with one audio sound that loops. The audio sound will be timed according to the traffic light of the intersection. The sound intensity will increase when the traffic light will switch to red.The FM or AM transmitter will have a specific signal number on it that can be read by braille or by writing. The FM or AM transmitter will be in a weather resistance box that can be locked. The second part, which is the FM or AM receiver will be portable and easy to use. The FM or AM receiver will be attached to an amp with a speaker that will vibrate and make sound in the same time. The FM or AM receiver will have a display and a number keypad that is arranged in a way that can be easy to use. When the user wants to cross the street, he will read the signal number and then put it in the FM or AM receiver and the receiver will pick up the sound. When the speaker vibrates with a steady sound that means it's safe to cross, and if it's a fast beat then it's not safe to cross.

The requirements of each main part: -

*The FM or AM transmitter: -

1- A small the FM or AM transmitter that has an audio cable.

2- A small MP3 player with a loop audio sound with a repeated beat with high bass.

3- A weather prof box that has a lock.

4- A amp with a strong speaker.

5- An AC adapter.

*The FM or AM receiver: -

1- A radio receiver with a display.

2- A pocket amp with a speaker.

3- An audio splitter and headphones.

4- A small casing that can be used to put all the components and can be held by the user.

Advantages

Disadvantages

1-      Very cheap.

2-      Can be used by anyone.

3-      Light weight.

4-      No health concern.

5-      Small design and portable.

 

 

1-      The signal can be interfered which can be risky.

2-      Limited distance so it can be used for very long streets.

3-      Two transmittersshould be installed on one intersection.

4-      There are some laws concerns with the use of radio signals.#question..

Mechanical Engineering, Engineering

  • Category:- Mechanical Engineering
  • Reference No.:- M9530893

Have any Question?


Related Questions in Mechanical Engineering

Expansion processes of a perfect gasassignment1 attend the

Expansion Processes of a Perfect Gas Assignment: 1. Attend the laboratory class and complete the lab tests according to the supervisor's requirement. Students will not allowed to submit their report if they do not come t ...

Structural mechanics questions -q1 a 150-lb bucket is

Structural Mechanics Questions - Q1. A 150-lb bucket is suspended from a cable on the wooden frame. Determine the resultant internal loadings on the cross section at D, and at E. Q2. The shaft is supported at its ends by ...

Problem -a long pipe od 1413 mm id 1318 mm kp 20 wmk

Problem - A long pipe (OD = 141.3 mm, ID =131.8 mm, k p = 20 W/m.K) supplies hot pressurized liquid water at 400 K to a heater in a factory. The pipe has an insulation thickness of 100 mm. A new efficient heater replaces ...

Assignment -q1 explain the difference between the

Assignment - Q1. Explain the difference between the metacentric height of a ship during 'Partially Afloat condition and 'Free Floating' condition; aid a sketch to support your answer. Q2. With the aid of sketches, explai ...

Heat transfer and combustionyou will need graph paper a

HEAT TRANSFER AND COMBUSTION You will need graph paper, a calculator, a copy of Appendix 1 from lesson HTC - 4 - 2 and access to steam tables to answer this TMA. 1. A fuel gas consists of 75% butane (C 4 H 10 ), 10% prop ...

Alocate ten minutes for the presentationuse audio visual

Allocate ten minutes for the presentation Use audio / visual / technological supports / aids where appropriate Use a minimum of 3 properly referenced articles. THEMES PRESENTATION TOPIC MEMORY Discuss the three learning ...

Problem on shaft -assuming no frictional losses a torque of

Problem on Shaft - Assuming no frictional losses, a torque of T = 750lb·in is applied through the shaft of gear F in order to drive the roller chain at point B at a constant speed. The chain sprocket has a pitch diameter ...

Assignment - machine learning for signal processingproblem

Assignment - Machine Learning for Signal Processing Problem 1: Instantaneous Source Separation 1. As you might have noticed from my long hair, I've got a rock spirit. However, for this homework I dabbled to compose a pie ...

The aim of the project is to demonstrate certain aspects of

The aim of the project is to demonstrate certain aspects of engineering materials in different applications. The projects will be assessed on the basis of a written Research Report. The report should clearly show what yo ...

Life cycle assessmentfor your chosen service eg white

LIFE CYCLE ASSESSMENT For your chosen service (e.g. white board markers), identify two alternatives of getting the service (e.g. brand A, brand B). Choose the most environmentally friendly option by conducting life cycle ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As