Ask Question, Ask an Expert

+1-415-315-9853

info@mywordsolution.com

Ask Electrical & Electronics Expert

problem 1: State the noise figure of an amplifier. Compute the overall noise figure of ‘n’ cascaded networks, having gains A1, A2……….An and individual noise figure source, F1, F2,……..Fn correspondingly.

problem 2: Describe in brief the terms noise figure and noise temperature.

problem 3: If F1 and F2 are the noise figures and G1 and G2 are available power gains of two amplifiers in cascaded, illustrate that the overall noise figure F is given by F = F1 + F2 -1/G

problem 4: State the noise figure of an amplifier. Compute the noise figure of a vacuum tube amplifier supposing appropriate parameter.

problem 5: Describe different kinds of noise in:

a) Junction diodes.
b) Junction transistors.

problem 6: describe an experimental setup for the measurement of noise figure showing that the noise figure F is independent of the network gain and input resistance.

problem 7: Describe the Sources of noise in semiconductors. Determine the noise figure of grounded base transistor amplifier.

problem 8: Illustrate that the noise figures of grounded cathode, grounded grid and grounded plate vacuum tube amplifiers are approximate the similar.

problem 9: prepare descriptive notes on the given:

a) Minimum noise network
b) External noise

problem 10: What are various types of non-man made noise which might arise in a communication system? Describe the origin and nature of each kind. 

Electrical & Electronics, Engineering

  • Category:- Electrical & Electronics
  • Reference No.:- M97559

Have any Question? 


Related Questions in Electrical & Electronics

Assignmentpart 1 conductors1 a type tw cable containing two

Assignment: Part 1: Conductors 1. A type TW cable containing two No. 12 copper conductors has a maximum overcurrent protection of A. 15 A. B. 25 A. C. 30 A. D. 20 A. 2. Which one of the following types of wire can be use ...

Let xt be a signal whose fourier transform xomega is

Let x(t) be a signal whose Fourier transform X(ω) is nonzero only over 3 ≤ |ω| ≤ 9. Further, only frequencies 5 ≤ |ω| ≤ 7 contain useful information (the other frequencies can be considered to contain noise or different ...

1 outline the steps involved in the magnetoquasistatic

1. Outline the steps involved in the magnetoquasistatic field analysis of a parallel plate structure and the determination of its input behavior. Compare the input behavior with the magnetostatic case. 2. Outline the ste ...

The rate at which metallic ions are electroplated from a

The rate at which metallic ions are electroplated from a dilute electrolytic solution onto a rotating disk electrode is usually governed by the mass diffusion rate of ions to the disk. This process is believed to be cont ...

1 the rocket nozzle shown below consists of three welded

1. The rocket nozzle shown below consists of three welded sections. Determine the axial stress at junctions 1 and 2 when the rocket is operating at sea level. The mass flow rate is 770 lb m /s. 2. The pressure on the con ...

1 a 15 v aa battery that costs 1 is rated at 18 ah what is

1. A 1.5 V AA battery that costs $1 is rated at 1.8 Ah. What is its cost per kWh? 2. Suppose a 12-V battery bank rated at 200 Ah under standard conditions needs to deliver 600 Wh over a 12-h period each day. If they oper ...

1 how is the magnetic flux density defined in terms of

1. How is the magnetic flux density defined in terms of force on a current element? 2. How is the magnetic flux density defined in terms of force on a moving charge? 3. What are the units of the magnetic flux density? 4. ...

An exhaust stream leaving a semiconductor fabrication plant

An exhaust stream leaving a semiconductor fabrication plant contains 4 mol % volatile organic chemical, VOC, pollutant. Twenty-five cubic meters per minute enter the bottom of a packed absorption tower and flows counterc ...

For the euler beam element shown in the figure derive the

For the Euler beam element shown in the figure, derive the interpolation functions, N I (ξ), stiffness matrix, k, and nodal force vector, f. Assume that the uniformly distributed load is  f (x) = f. Note that the referen ...

1 complete the missing steps in the evaluation of the

1. Complete the missing steps in the evaluation of the integral in equation (9.39a). 2. Find the time-average power required to be radiated by a half-wave dipole in order to produce an electric field intensity of peak am ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Section onea in an atwood machine suppose two objects of

SECTION ONE (a) In an Atwood Machine, suppose two objects of unequal mass are hung vertically over a frictionless

Part 1you work in hr for a company that operates a factory

Part 1: You work in HR for a company that operates a factory manufacturing fiberglass. There are several hundred empl

Details on advanced accounting paperthis paper is intended

DETAILS ON ADVANCED ACCOUNTING PAPER This paper is intended for students to apply the theoretical knowledge around ac

Create a provider database and related reports and queries

Create a provider database and related reports and queries to capture contact information for potential PC component pro

Describe what you learned about the impact of economic

Describe what you learned about the impact of economic, social, and demographic trends affecting the US labor environmen