Ask Question, Ask an Expert

+61-413 786 465

info@mywordsolution.com

Ask Mechanical Engineering Expert

Question 1) A truck is stopped on a 15% grade. For some reason, the transmission is shifted into neutral with the parking brakes off so the vehicle can free roll down the constant slope. Assume the rotational intertia of the drivetrain to be negligible. Assume wind and rolling resistance to be negligible.

a) How fast will the truck be going after it travels 100 meters along the surface?

b) How fast will the truck be going after 10 seconds?

Question 2) Two rigid cylinders, #1 and #2, are rolled down a rigid slope m a distance d without slipping. They both have the same mass, but one has a radius r1 and the other has a larger radius r2.

1272_img2.png

a) Which one will reach the bottom first? Circle one: #1, or #2

b) Determine the symbolic ratio of speeds of the two cylinders after a specific distance is traveled. In other words, determine a simplified expression for v1/v2 in terms of m, d, r1 and r2. You are proving your answer to part a.

Question 3) An accelerometer is connected to a 20-lb frictionless linear sled and records the following accelerations.

32_img3.png

a) What is the most likely change in velocity in miles per hour?

b) What is the change in kinetic energy of the sled?

c) How much work was done to the sled?

Question 4) A baseball bat has a "sweet spot" that corresponds to the batter feelings little as he or she strikes that ball. If the bat is 32 inches long, weight 34 ounces, has a moment of inertia IG = 0.0413 slug-ft2, the center of grip is δ = 3 inches, and l = 23.5 inches, then determine the value of d such that the reaction force at O is zero in the direction parallel to impact. Assume that bat pivots about point O.

Question 5) The front left corner of a 1500-kg vehicle strikes a rigid bridge support and moves off to the right at an angle of 30 degree from the direction of impact. It was determined that the impact velocity was 88 km/h (at 0 degrees) and the Δv in the x-direction (0 degrees from the direction of impact) was -37 km/h. Neglect any effects of rotation or friction.   

a) What is the magnitude of the Δv vector?

b) What is the direction of the Δv vector?

c) What was the post impact velocity magnitude?

d) What was the impulse magnitude acting on the vehicle?

e) Was momentum conserved in this event?

f) How much kinetic energy was lost during this crash?

Mechanical Engineering, Engineering

  • Category:- Mechanical Engineering
  • Reference No.:- M91670402

Have any Question?


Related Questions in Mechanical Engineering

Problem -a long pipe od 1413 mm id 1318 mm kp 20 wmk

Problem - A long pipe (OD = 141.3 mm, ID =131.8 mm, k p = 20 W/m.K) supplies hot pressurized liquid water at 400 K to a heater in a factory. The pipe has an insulation thickness of 100 mm. A new efficient heater replaces ...

Force exerted by jet on moving cart1 you need to determine

Force Exerted By Jet On Moving cart. 1. You need to determine the velocity of water that comes out from the nozzle of this system. need the equation please formulate the equation. 2. This water will strike a small cart a ...

Mechanical engineering assignment task - solve the given

Mechanical Engineering Assignment Task - Solve the given problem. Task 1 - A spring with a one-turn loop of 40mm mean radius is formed from a round section of wire having 5 mm diameter. The straight tangential legs of th ...

Assignment - machine learning for signal processingproblem

Assignment - Machine Learning for Signal Processing Problem 1: Instantaneous Source Separation 1. As you might have noticed from my long hair, I've got a rock spirit. However, for this homework I dabbled to compose a pie ...

Materials behaviour from atoms to bridges assignment -

Materials Behaviour from Atoms to Bridges Assignment - Distributed loads and static equilibrium (Please note: you should show your steps with necessary figures) Q1. Two beam sections are jointed at C and supported at A b ...

Assignment -q1 explain the difference between the

Assignment - Q1. Explain the difference between the metacentric height of a ship during 'Partially Afloat condition and 'Free Floating' condition; aid a sketch to support your answer. Q2. With the aid of sketches, explai ...

The aim of the project is to demonstrate certain aspects of

The aim of the project is to demonstrate certain aspects of engineering materials in different applications. The projects will be assessed on the basis of a written Research Report. The report should clearly show what yo ...

Heat transfer and combustionyou will need graph paper a

HEAT TRANSFER AND COMBUSTION You will need graph paper, a calculator, a copy of Appendix 1 from lesson HTC - 4 - 2 and access to steam tables to answer this TMA. 1. A fuel gas consists of 75% butane (C 4 H 10 ), 10% prop ...

Projectflow processing of liquor in a mineral refining

Project Flow Processing of Liquor in a Mineral Refining Plant The aim of this project is to design a flow processing system of liquor (slurry) in a mineral (aluminum) refining plant. Aluminum is manufactured in two phase ...

Fluid mechanics assignment - viscous flow in pipesq1 as

Fluid Mechanics Assignment - Viscous Flow in Pipes Q1. As shown in the figure below, water "bubbles up" 3 in. above the exit of the vertical pipe attached to three horizontal pipe segments. The total length of the 0.75-i ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As