Ask Question, Ask an Expert

+61-413 786 465

info@mywordsolution.com

Ask Mechanical Engineering Expert

Q1. A block with mass 1.5 kg gently placed on a ramp (θ = 20o) and then released. The coefficients of friction are μk = 0.25 and  μs = .85.

a) Find the magnitude of the friction force.

b) Find the acceleration of the block.

2498_figure.png

Q2. Two blocks are attached to opposite ends of a massless rope that goes over a massless, frictionless pulley. One of the blocks, witrh a mass of 8.0 kg, accelerates downwars at ¾g.

a) What is the mass of the other block?

b) What is the acceleration magnitude and direction of the other block?

c) What is the tension in the rope?

Q3. An apple crate with a weight of 12.5 N accelerates from rest along a horizontal surface as the crate is pulled with a force of 24.5 N as shown in the drawing. If μk = 0.20, what is the:

a) Horizontal acceleration of the crate?

b) Speed of the crate after it has moved 5 m?

234_figure1.png

Q4. A 23 kg mass is connected to a nail on a frictionless table by a massless string 1.3 m long. There is no appreciable friction between the nail and the string. If the tension in the string is 51 N while the mass moves in a uniform circle on the table.

a) List the forces that act on the mass.

b) How long does it take for the mass to make one complete revolution?

c) If the maximum tension in the string is 90 N, what is the maximum speed of the mass?

Bonus Question - A block with mass m slides down a frictionless ramp (θ = 30o) but is slowed by the drag force from a "round" parachute with cross sectional area A . If the drag coefficient for the parachute is C and the density of air is ρ and the block's speed is v, then magnitude of the drag force D = ½ ρACv2, The block starts initially at rest and the speed increases until the terminal velocity is reached.

a) Draw a free body diagram for the block.

b) During the time that the speed was increasing toward the terminal velocity: (circle choices)

i) does the acceleration: stay the same, increase, or decrease

ii) does the drag force D: stay the same, increase, or decrease

c) If D = 300 N when the block is at the terminal velocity, what is the weight of the block?

1013_figure3.png

Mechanical Engineering, Engineering

  • Category:- Mechanical Engineering
  • Reference No.:- M92376261

Have any Question?


Related Questions in Mechanical Engineering

Questions -q1 a qualitative estimate of the effect of a

Questions - Q1. A qualitative estimate of the effect of a wind-tunnel contraction (Figure) on turbulent motion can be obtained by assuming that the angular momentum of eddies does not change through the contraction. Let ...

Assignment - machine learning for signal processingproblem

Assignment - Machine Learning for Signal Processing Problem 1: Instantaneous Source Separation 1. As you might have noticed from my long hair, I've got a rock spirit. However, for this homework I dabbled to compose a pie ...

5star questions amp answers1a define heat treatment bname

5 STAR QUESTIONS & Answers 1. A) Define Heat treatment B) Name different types of heat treatment processes C) Write any 4 purposes of Heat treatment 2. Explain various Heat treatment processes 3. A) Compare Thermo plasti ...

Problem -a long pipe od 1413 mm id 1318 mm kp 20 wmk

Problem - A long pipe (OD = 141.3 mm, ID =131.8 mm, k p = 20 W/m.K) supplies hot pressurized liquid water at 400 K to a heater in a factory. The pipe has an insulation thickness of 100 mm. A new efficient heater replaces ...

The aim of the project is to demonstrate certain aspects of

The aim of the project is to demonstrate certain aspects of engineering materials in different applications. The projects will be assessed on the basis of a written Research Report. The report should clearly show what yo ...

Question - truss structureconsider the three membered

Question - Truss Structure Consider the three membered planar truss structure shown in the figure below. All members of the truss have identical square cross-sectional area (A) of 25 mm x 25 mm, and Youngs Modulus (E) = ...

Expansion processes of a perfect gasassignment1 attend the

Expansion Processes of a Perfect Gas Assignment: 1. Attend the laboratory class and complete the lab tests according to the supervisor's requirement. Students will not allowed to submit their report if they do not come t ...

The aim of the project is to demonstrate certain aspects of

The aim of the project is to demonstrate certain aspects of engineering materials in different applications. The projects will be assessed on the basis of a written Research Report. The report should clearly show what yo ...

Assignment -q1 explain the difference between the

Assignment - Q1. Explain the difference between the metacentric height of a ship during 'Partially Afloat condition and 'Free Floating' condition; aid a sketch to support your answer. Q2. With the aid of sketches, explai ...

Force exerted by jet on moving cart1 you need to determine

Force Exerted By Jet On Moving cart. 1. You need to determine the velocity of water that comes out from the nozzle of this system. need the equation please formulate the equation. 2. This water will strike a small cart a ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As