Ask Electrical & Electronics Expert

Q. What do you mean by Byte?

Without question, the most vital data structure used by the 80x86 microprocessor is the byte this is true since the ASCII code is a 7-bit non-weighted binary code that is used on the byte boundary in most computers and A byte consists of eight bits and is the smallest addressable datum (data item) in the microprocessor.

I/O addresses and Main memory in the PC are all byte addresses this means that the smallest item that can be individually accessed by an 80x86 program is an 8-bit value. To access anything smaller needs that you read the byte containing the data and mask out the unwanted bits.

The bits in the byte are numbered from bit zero (b0) through seven (b7) as follows:

b7

b6

b5

b4

b3

b2

b1

b0

A Bit 0 is the low order bit or least significant bit, bit 7 is the high order bit or most important bit of the byte. We'll refer to all other bits by their number.

A byte as well contains exactly two nibbles and Bits b0 through b3 comprise the low order nibble, and bits b4 through b7 form the high order nibble. Ever since a byte contains exactly two nibbles, byte values require two hexadecimal digits.

Ever since a byte contains eight bits, it can represent 2^8, or 256, different values. Generally, we'll use a byte to represent:

  1. unsigned numeric values in the range 0 => 255
  2. signed numbers in the range -128 => +127
  3. ASCII character codes
  4. Other special data types requiring not more than 256 different values. Many data types have less than 256 items so eight bits is usually sufficient.

Ever since the PC is a byte addressable machine, it turns out to be more efficient to manipulate a whole byte than an individual bit or nibble. Therefore, most programmers use a whole byte to represent data types that require no more than 256 items, even if fewer than eight bits would suffice. For illustration, we'll often represent the boolean values true and false by 00000001 and 00000000 (respectively).

Most likely the most important use for a byte is holding a character code. Characters typed at the keyboard displayed on the screen, and printed on the printer all have numeric values. To permit it to communicate with the rest of the world, the IBM PC uses a variant of the ASCII character set as there are 128 defined codes in the ASCII character set. IBM PC uses the remaining 128 possible values for extended character codes including European characters, Greek letters, graphic symbols, and math symbols.

Electrical & Electronics, Engineering

  • Category:- Electrical & Electronics
  • Reference No.:- M9560604

Have any Question?


Related Questions in Electrical & Electronics

Question 1for the ce amplifier in figure 1 given the

Question 1 For the CE amplifier in Figure (1), given the following component parameters: Parameter Value β DC , β AC 150 V BE 0 . 7 V V CC 12 V R C 820 ? R E 1 100 ? R E 2 220 ? R 1 20 k? R 2 5 . 2 k? R L 100 k? C 1 , C ...

Question -i a star-connected three-phase synchronous

Question - (i) A star-connected, three-phase synchronous induction motor takes a current of 10 amps from a 415 volt supply at unity power factor when supplying a steady load. If the synchronous reactance is 5 ohms/phase ...

1 a name the three major groups of contamination and

1. (a) Name the three major groups of contamination and briefly describe their physical characteristics. (b) Where do the above contamination types come from? Give one example of each. 2. Name two processes metrics which ...

Question 1 in the voltage regulator circuit in figure p221

Question 1: In the voltage regulator circuit in Figure P2.21, V 1 = 20 V, V Z = 10 V, R i = 222Ω and P z (max) = 400 mW. (a) Determine I L, I z , and I L , if R L = 380Ω. (b) Determine the value of R L , that will establ ...

Summative assessmentin 2017 sej101 assessment will consist

Summative Assessment In 2017 SEJ101 assessment will consist of nine tasks that will develop a portfolio of your assessed work. Throughout the trimester you will have the opportunity for feedback on all nine tasks before ...

1 a name the three major groups of contamination and

1. (a) Name the three major groups of contamination and briefly describe their physical characteristics. (b) Where do the above contamination types come from? Give one example of each. 2. Name two processes metrics which ...

1 a name the three major groups of contamination and

1. (a) Name the three major groups of contamination and briefly describe their physical characteristics. (b) Where do the above contamination types come from? Give one example of each. 2. Name two processes metrics which ...

Case studythis assignment consists of a written report of

CASE STUDY This assignment consists of a written report of approximately 1000 words and any diagrams in which you are asked to critically compare different process methods used to achieve the same result and show an awar ...

Problem 1 a two-phase servomotor has rated voltage applied

Problem 1: A two-phase servomotor has rated voltage applied to its excitation winding. The torque speed characteristic of the motor with Vc = 220 V, 60 Hz applied to its control phase winding is shown in Fig.1. The momen ...

Electrical engineering questions -q1 two ideal voltage

Electrical Engineering Questions - Q1. Two ideal voltage sources designated as machines 1 and 2 are connected, as shown in the figure below. Given E 1 = 65∠0 o V, E 2 = 65∠30 o V, Z = 3Ω. Determine if Machine 1 is genera ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As