Ask Question, Ask an Expert

+61-413 786 465

info@mywordsolution.com

Ask Electrical & Electronics Expert

Q. Explain Standard set of procedure used in Completing a call?

Completing a local telephone call between two subscribers linked to the same telephone switch is accomplished through a standard set of procedure which includes 10 steps listed below.

1. Calling station goes off hook.

2. After  detecting  a  dc  current  flow  on  the  loop,  switching  machine returns  an  audible  dial  tone  to  calling  station,  acknowledging  that  caller has access to switching machine.

3. Caller  dials  the  destination  telephone  number  using  one  of  the  two methods: Mechanical dial pulsing or more likely electronic dual-tone multi frequency (Touch-Tone) signals.

4. When switching machine detects first dialled number, it removes the dial tone from loop.

5. Switch interprets the telephone number and then locates loop for the destination telephone number.

6. Before ringing destination telephone , switching machine tests the destination  loop  for  dc  current  to  see  if  it  is  idle  (on  hook)  or  in  use  (off hook). At the same instance, switching machine locates a signal path through the switch amid the two local loops.

7. (a) If destination telephone is off hook, switching machine transmits a station busy signal back to the calling station.

 (b) If destination telephone is on hook, switching machine transmits a ringing  signal  to  destination  telephone  on  the  local  loop  and  same time transmits a ring  back  signal to  calling  station to  give the  caller  some assurance that something is happening.

8. When  destination  answers  the  telephone,  it  completes  the  loop, causing dc current to flow.

9. Switch  recognizes  the  dc  current  as  station  answering  the telephone. At this instance, switch removes the ringing and ring-back signals and completes the path through switch,  allowing the  calling  and called parties to begin conversation.

10. When either end goes on hook, switching machine detects an open circuit  on  that  loop  and  then  drops  connections through  switch.

Electrical & Electronics, Engineering

  • Category:- Electrical & Electronics
  • Reference No.:- M9578632

Have any Question?


Related Questions in Electrical & Electronics

Question 1 in the voltage regulator circuit in figure p221

Question 1: In the voltage regulator circuit in Figure P2.21, V 1 = 20 V, V Z = 10 V, R i = 222Ω and P z (max) = 400 mW. (a) Determine I L, I z , and I L , if R L = 380Ω. (b) Determine the value of R L , that will establ ...

Assignment -consider a common emitter amplifiernow lets say

Assignment - Consider a common emitter amplifier: Now let's say that R B and R C do a fine job at DC biasing the BJT but they are large so they can be neglected for small signal (AC) analysis. In that case, the equivalen ...

Assignment - power distribution system transformerscomplete

Assignment - Power Distribution System Transformers Complete your calculations, drawings, and answers, neatly handwritten on these sheets and hand in at the start of lecture in week 6. Absolutely no late submissions will ...

Question -i a star-connected three-phase synchronous

Question - (i) A star-connected, three-phase synchronous induction motor takes a current of 10 amps from a 415 volt supply at unity power factor when supplying a steady load. If the synchronous reactance is 5 ohms/phase ...

1 a name the three major groups of contamination and

1. (a) Name the three major groups of contamination and briefly describe their physical characteristics. (b) Where do the above contamination types come from? Give one example of each. 2. Name two processes metrics which ...

Question 1 a pnp transistor withnbspbeta 60 is connected

Question 1. A pnp transistor with β = 60 is connected in a common-base configuration as shown in figure P5.8 (a) The emitter is driven by a constant-current source with I E = 0.75 mA. Determine I B , I C , α, and V C . ( ...

Research report1 read 3 to 4 journal articles about digital

Research report 1. Read 3 to 4 journal articles about digital control or industrial control, eg. one particular application, implementation aspect such as selection of sampling time, hardware etc. No text book example is ...

Question 1 - for the transistor in the circuit shown in

Question 1 - For the transistor in the circuit shown in Figure, assume β = 120. Design the circuit such that I CQ = 0.15 mA and R TH = 200kΩ. What is the value of V CEQ ? Question 2 - (a) For the circuit shown in figure, ...

1 a name the three major groups of contamination and

1. (a) Name the three major groups of contamination and briefly describe their physical characteristics. (b) Where do the above contamination types come from? Give one example of each. 2. Name two processes metrics which ...

A four-pole star-connected squirrel-cage induction motor

A four-pole, star-connected, squirrel-cage induction motor operates from a variable voltage 50 Hz three-phase supply. The following results were obtained as the supply voltage was gradually reduced with the motor running ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As