Ask Question, Ask an Expert

+61-413 786 465

info@mywordsolution.com

Ask Electrical & Electronics Expert

Part-1

Q 1. For the circuit shown, determine

a) The time constant when the switch moves to position 1

b) The mathematical expression of vc, ic when the switch moves to position 1

c) vc & ic if the switch moves to position 2 at t=100ms

d) The mathematical expression of vc & ic when the switch moves to position 3 after it remained for 50ms on position 2.

e) Plot the waveforms of vc, & ic showing their behaviors in the time interval from t=0 to t=400ms.

1491_Electrical Circuits.png

Q2. For the given circuit, the switch is closed after the capacitors are fully charged.

a) What would be the initial value of vc(t) when switch is closed?

b) Determine the time constants in both cases (switch is open, switch is closed).

c) Find vc(t) & ic(t) for t=1 m seconds, t=1.8m seconds and t=2.5m seconds

d) Plot the responses of vc(t) & ic(t) with time.

2116_Electrical Circuits1.png

Part-2

Q 1. For the circuit shown, determine

a) The time constant z when the switch is closed

b) The inductor and resistor voltages and currents when the switch is closed.

c) The mathematical expression of IL, vL & vR when the switch is open at t=51.1. seconds.

d) vL & iL at t=3T

e) Plot the waveforms of iL & vL

 

471_Electrical Circuits2.png

Q2. For the circuit shown, determine

a) The maximum values of iL & vL

b) The inductor and resistor voltages and currents when the switch is closed.

c) The mathematical expression for inductor and resistors currents when the switch is open after inductor reaches its maximum current.

d) Resistor voltages at t=3T

e) Plot the waveforms of iL & vL.

494_Electrical Circuits3.png

Q3. For the given circuit, the capacitor and inductors have reached the steady state. Determine VL, IL & I2.

1085_Electrical Circuits4.png

Part-3

Q1. Write down the following expressions in terms of sine function:

a.  cosα = sin(?)

b.  -sinα = sin(?)

c.  -cosα = sin(?)

Q2. For the given periodic waveform, Determine

528_Electrical Circuits5.png

a) T b) f c) Vmax and vp-p d) number of cycles shown

Q.3 If v(t) = 300sin(157t), how long in seconds does it take this waveform to complete 1/2 cycle.

Q4. Write the analytical expression for the given waveforms

31_Electrical Circuits6.png

Q5  If a periodic waveform has a frequency of 20Hz, how long in seconds will it takes to complete 5 cycles?

Q6 Find the phase relation between the following signals:

a. v = -5 sin(ωt + 75°) & i = 10 cos(ωt -130°)

b. v = -3 cos(ωt) & i = 8sin(ωt + 55° )

Electrical & Electronics, Engineering

  • Category:- Electrical & Electronics
  • Reference No.:- M9744539

Have any Question?


Related Questions in Electrical & Electronics

1 goalin this project you will solve a non-trivial design

1 Goal In this project you will solve a non-trivial design problem explicitly using the divide-and-conquer (D&C) approach. The main reason for using the D&C approach is the ease of the design process and the streamlined ...

Problem 1 a two-phase servomotor has rated voltage applied

Problem 1: A two-phase servomotor has rated voltage applied to its excitation winding. The torque speed characteristic of the motor with Vc = 220 V, 60 Hz applied to its control phase winding is shown in Fig.1. The momen ...

Questions -problem 1 - a series rlc network has r 2 komega

Questions - Problem 1 - A series RLC network has R = 2 kΩ, L = 40 mH and C = 1μF. Calculate the impedance at resonance and at one-fourth, one-half, twice, and four times the resonant frequency. Problem 2 - Design a serie ...

Research report1 read 3 to 4 journal articles about

Research report 1. Read 3 to 4 journal articles about digital control or industrial control, eg. one particular application, implementation aspect such as selection of sampling time, hardware etc. No text book example is ...

Questions -problem 1 - determine the laplace transform ofa

Questions - Problem 1 - Determine the Laplace transform of: (a) cos(ωt + θ) (b) sin(ωt + θ) Problem 2 - Obtain the Laplace transform of each of the following functions: (a) e -2t cos(3t)u(t) (b) e -2t sin(4t)u(t) (c) e - ...

Problem 1given a sequence xn for 0lenle3 where x0 1 x1 1

Problem # 1: Given a sequence x(n) for 0≤n≤3, where x(0) = 1, x(1) = 1, x(2) = -1, and x(3) = 0, compute its DFT X(k). (Use DFT formula, don't use MATLAB function) Problem # 2: Use inverse DFT and apply it on the Fourier ...

Questions -problem 1 - given the sinuosidal voltage vt 50

Questions - Problem 1 - Given the sinuosidal voltage v(t) = 50 cos(30t+10 o ) V, find: (a) the amplitude V m (b) the period T, (c) the frequency f and (d) v(t) at t = 10 ms. Problem 2 - A current source in a linear circu ...

Discuss the role of load factor on the cost of electrical

Discuss the role of load factor on the cost of electrical energy.

Questions -q1 a single-phase transformer rated 21 kv130 v

Questions - Q1. A single-phase transformer rated 2.1 kV/130 V, 7.8 kVA has the following winding parameters: r1= 0.7Ω, x1 = 0.9Ω, r2 = 0.04Ω and x2 = 0.05Ω. Determine: a. The combined winding resistance ________ Ω and le ...

Problem 1given a sequence xn for 0lenle3 where x0 1 x1 1

Problem # 1: Given a sequence x(n) for 0≤n≤3, where x(0) = 1, x(1) = 1, x(2) = -1, and x(3) = 0, compute its DFT X(k). (Use DFT formula, don't use MATLAB function) Problem # 2: Use inverse DFT and apply it on the Fourier ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As