Ask Question, Ask an Expert

+1-415-315-9853

info@mywordsolution.com

Ask Electrical & Electronics Expert

problem 1:

Illustrate out the various traction systems used in our country.

problem 2:

Illustrate out the speed time curves employed for train movement in grief.

problem 3:

A suburban electric train has the maximum speed of 65kmph.The schedule speed comprises a station stop of 30 seconds is 43.5 kmph. If the acceleration is 1.3kmphps, find out the value of retardation when the average distance between the stops is 3 km.

problem 4:

Obtain expression for the specific energy output on Level track using simplified speed time curve. What is its importance?

problem 5:

prepare down a brief notes on following terms:

a) Methods of electric braking

b) Dielectric heating

c) Principles of lighting control.

Electrical & Electronics, Engineering

  • Category:- Electrical & Electronics
  • Reference No.:- M910958

Have any Question? 


Related Questions in Electrical & Electronics

1 draw the symbols for the nand nor xor and xnor gates what

1. Draw the symbols for the NAND, NOR, XOR, and XNOR gates. What is the difference between the Buffer, AND, OR, XOR and the NOT, NAND, NOR, and XNOR gates? 2. Modify the circuit from question 2 to use a second AND gate o ...

In a switch using the token bucket algorithm tokens are

In a switch using the token bucket algorithm, tokens are added to the bucket at a rate of r = 5 tokens/second. The capacity of the token bucket is c = 10. The switch has a buffer that can hold only eight packets (for the ...

1 a synchronous alternator is supplying 09 pu power to the

(1) A synchronous alternator is supplying 0.9 p.u. power to the grid when a temporary three-phase short occurs on the interconnector. The power angle curves are:- Pre-fault = 2.0 sin(delta) During fault = 0.5 sin(delta) ...

1 if a communication is unicast how can we use rsvp which

1. If a communication is unicast, how can we use RSVP, which is designed for multicast in IntServ? 2. How can multicasting be achieved using DiffServ? 3. Why do we need Path and Resv messages in RSVP? 4. How many per-hop ...

1 oil is supplied at the center of two long plates the

1. Oil is supplied at the center of two long plates. The volumetric flow rate per unit length is Q and the plates remain a constant distance, b, apart. Determine the vertical force per unit length as a function of the Q, ...

1 for flow at very low speeds and with large viscosity the

1. For flow at very low speeds and with large viscosity (the so-called creeping flows) such as occur in lubrication, it is possible to delete the inertia terms, Dv/Dt, from the Navier- Stokes equation. For flows at high ...

Let xt be a signal whose fourier transform xomega is

Let x(t) be a signal whose Fourier transform X(ω) is nonzero only over 3 ≤ |ω| ≤ 9. Further, only frequencies 5 ≤ |ω| ≤ 7 contain useful information (the other frequencies can be considered to contain noise or different ...

1 the functional frequency n of a stretched string is a

1. The functional frequency n of a stretched string is a function of the string length L, its diameter D, the mass density r, and the applied tensile force T. Suggest a set of dimensionless parameters relating these vari ...

A voltage generator is connected to the input of a lossless

A voltage generator is connected to the input of a lossless line short-circuited at the far end. The frequency of the generator is varied and the line voltage and line current at the input terminals are monitored. It is ...

For a line charge of uniform density 10-3 cm situated along

For a line charge of uniform density 10 -3 C/m situated along the z-axis between (0, 0, -1) and (0, 0, 1), obtain the series expression for the electric potential at the point (0, y, 0) by dividing the line charge into 1 ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Section onea in an atwood machine suppose two objects of

SECTION ONE (a) In an Atwood Machine, suppose two objects of unequal mass are hung vertically over a frictionless

Part 1you work in hr for a company that operates a factory

Part 1: You work in HR for a company that operates a factory manufacturing fiberglass. There are several hundred empl

Details on advanced accounting paperthis paper is intended

DETAILS ON ADVANCED ACCOUNTING PAPER This paper is intended for students to apply the theoretical knowledge around ac

Create a provider database and related reports and queries

Create a provider database and related reports and queries to capture contact information for potential PC component pro

Describe what you learned about the impact of economic

Describe what you learned about the impact of economic, social, and demographic trends affecting the US labor environmen