Ask Question, Ask an Expert

+61-413 786 465

[email protected]

Ask Mechanical Engineering Expert

Engineering


Home >> Mechanical Engineering

Magnetic Alloy Steels:

These steels are divided into two sets. Such which retain their magnetism and that which do not. The steels which retain their magnetism are termed as hard magnetic steels. The other group is magnetically soft.

1 percent plain carbon steel in its entirely hardened situation was the earliest permanent magnetic material. Later improvements occurred whilst W, Cr and cobalt were added like alloying elements. The most helpful of permanent magnetic steels contain high proportions of Nickel, Co, and Al, along with small amount of W. Alnico is an excellent example that comprises 10% Al, 18% Nickel, 12% Co, 6% Copper, Rest Fe.

Magnetically soft materials are needed to demagnetise rapidly. In prior days soft iron was utilized as a soft magnetic material but later iron-silicon alloys containing upto 4.5 percent Si were improved. Though, modern high duty soft magnetic materials are iron-nickel alloys as like: Permalloy that contains 78 percent Ni. Another soft magnetic material is mumetal having 75% Ni. These alloys are employed for transformer cores and as shield material for submarine cables.

Alloy steels calculate a wide range of application and a few of them are explained in Table.

Table: Application of Alloy Steels

Sl. No.

Application

Desired Properties

Composition (% )

1

Rail steel

Strength, ductility, impact and fatigue strength

C - 0.4 to 0.6 Mn and

Cr - upto 1

2

Spring steel (tension compression, torsion)

Good elongation high elastic limit (20 to 30%, 1200-1400 MPa). Good surface finish for fatigue strength

(a) C - 0.6, Mn - 0.9, Si - 2.0

(b) C - 0.5, Mn - 0.8, Cr - 1.0, V - 0.15

(c) C - 0.5, Ni - 0.9, Cr - 0.5, Ni - 0.6, Mo - 0.2

3

Structural steel (bridges, building, cars, gears, clutches, shafts)

High strength, toughness, high temperature strength, corrosion resistance

Wide range of alloy steels containing several alloying elements

4

Weldable steel for welded structures

Weldability, high resistance to atmospheric corrosion, resistance to brittle fracture

C - 0.15 to 0.3 with some

Cu and V

5

Concrete reinforcing steel

Bend 90o - 180o, tor-steel with ribs for greater surface area.

Elongation = 16%, UTS = 500-650 MPa, Y. S. = 35 MPa.

Elongation = 13%,

UTS = 600 MPa, Y. S. = 350 MPa

C - 0.3 to 0.4, Mn - 0.5 to 0.8

 

 

C - 0.45 to 0.6, Mn - 0.7 to 1.1

6

High speed steel for cutting tools

Resist temperature upto

550-600oC. Cutting tools requiring high hardness at working temperature 18 : 4 : 1 steel and

6 : 5 : 4 : 2 steel

C - 0.8, W - 18, Cr - 4, V - 1,

C - 0.8, W - 6,

Mo - 5, Cr - 4, V - 2

7

Creep resisting steel

Application in pipelines upto

400-550oC. Other parts upto

550oC

Mo - 0.4 to 6

V - 0.25 to 1.0

Cr - upto 6.0, C - low

8

Hadfield Mn steel, excavating and crushing m/c. rail road crossing, oil well, cement, mining industries. Used as casting and hot rolled

Resistance to abrasion and shock, high toughness strength and ductility

C - 1 to 1.4,

Si - 0.3 to 1.0, Mn - 10 to 14

9

High strength low alloy steel (HSLA) for automotive parts

High strength/weight ratio. Balanced properties such as toughness, fatigue strength, weldability and formability

C - 0.07 to 1.3, Ti, V, Al, Co less than 0.5

10

Ball bearing steel

Rolling element, inner and outer races. High hardness

61-65 Rc high fatigue strength

C - 0.9 to 1.1, Cr - 0.6 to 1.6, Mn - 0.2 to 0.4

Mechanical Engineering, Engineering

  • Category:- Mechanical Engineering
  • Reference No.:- M9524644

Have any Question?


Related Questions in Mechanical Engineering

The aim of the project is to demonstrate certain aspects of

The aim of the project is to demonstrate certain aspects of engineering materials in different applications. The projects will be assessed on the basis of a written Research Report. The report should clearly show what yo ...

Force exerted by jet on moving cart1 you need to determine

Force Exerted By Jet On Moving cart. 1. You need to determine the velocity of water that comes out from the nozzle of this system. need the equation please formulate the equation. 2. This water will strike a small cart a ...

Mechanical engineering assignment task - solve the given

Mechanical Engineering Assignment Task - Solve the given problem. Task 1 - A spring with a one-turn loop of 40mm mean radius is formed from a round section of wire having 5 mm diameter. The straight tangential legs of th ...

Projectflow processing of liquor in a mineral refining

Project Flow Processing of Liquor in a Mineral Refining Plant The aim of this project is to design a flow processing system of liquor (slurry) in a mineral (aluminum) refining plant. Aluminum is manufactured in two phase ...

Heat transfer and combustionyou will need graph paper a

HEAT TRANSFER AND COMBUSTION You will need graph paper, a calculator, a copy of Appendix 1 from lesson HTC - 4 - 2 and access to steam tables to answer this TMA. 1. A fuel gas consists of 75% butane (C 4 H 10 ), 10% prop ...

Assignment -q1 explain the difference between the

Assignment - Q1. Explain the difference between the metacentric height of a ship during 'Partially Afloat condition and 'Free Floating' condition; aid a sketch to support your answer. Q2. With the aid of sketches, explai ...

Materials behaviour from atoms to bridges assignment -

Materials Behaviour from Atoms to Bridges Assignment - Distributed loads and static equilibrium (Please note: you should show your steps with necessary figures) Q1. Two beam sections are jointed at C and supported at A b ...

Questions -q1 a qualitative estimate of the effect of a

Questions - Q1. A qualitative estimate of the effect of a wind-tunnel contraction (Figure) on turbulent motion can be obtained by assuming that the angular momentum of eddies does not change through the contraction. Let ...

Assignment - machine learning for signal processingproblem

Assignment - Machine Learning for Signal Processing Problem 1: Instantaneous Source Separation 1. As you might have noticed from my long hair, I've got a rock spirit. However, for this homework I dabbled to compose a pie ...

Problem -a long pipe od 1413 mm id 1318 mm kp 20 wmk

Problem - A long pipe (OD = 141.3 mm, ID =131.8 mm, k p = 20 W/m.K) supplies hot pressurized liquid water at 400 K to a heater in a factory. The pipe has an insulation thickness of 100 mm. A new efficient heater replaces ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As

Follow Us

© Copyright 2013-14 mywordsolution.com All rights reserved