Ask Question, Ask an Expert

+61-413 786 465

info@mywordsolution.com

Ask Civil Engineering Expert

LET'S PARTY!

"Let's party!" is still echoing in your head as you leave your Principles of Buying class. Again you ask yourself, "Why did I ever let myself run for class president?" Most of the people in the class were good, level-headed individuals who enjoyed a good time and you enjoyed working with them. But a small group from your class, who were known on campus as The Rowdies, often bullied their way on decisions affecting class activities. The decision to have a year-end party was right up their alley, and class had ended with a chanting session of "Let's party." It sounded like a wrestling match to you. Fortunately, your professor had left the room early to let you discuss with the class the idea of some kind of year-end get-together.

The Rowdies had immediately suggested the Goat's Ear, a local hangout with not much to offer but cheap drinks. The rest of your classmates had put forth some other suggestions, but no consensus on a location could be reached between the members of your executive committee or the rest of the class. If you went to the Goat's Ear most of the sane people in your class wouldn't attend, and even when you suggested more conventional locations, people couldn't agree because of factors such as the type of music played.

Since there were only two weeks left until the end of regular classes, you felt that you had to make arrangements in a hurry. It wasn't difficult to identify the most popular possible locations, but getting agreement from this group was going to be difficult.
One of your recent lectures was on supplier selection, and your professor had demonstrated the technique called the ranking or weighted-point method. It seemed simple enough in the lecture, and you had almost embarrassed yourself by asking the question "Why not just pick the least expensive supplier?" The thought occurred to you that there just might be some solution to your current problem in the professor's response, "One of the hardest things to do in any group, whether a business or a social club, is to get consensus on even the simplest choices."

Case Analysis

For this exercise, put yourself in the position of the class president described in this case and complete one of the two following exercises:

Exercise 1

1. Perform a supplier rating analysis for the situation. Include at least ten factors and four possible locations.

2. Make the selection as indicated by the analysis.

3. Discuss why the analysis led to your selection in step 2 and whether you would change any of the criteria or weights. Perform a supplier rating analysis for the situation. Include at least ten factors and four possible locations.

Exercise 2

1. Prepare a transparency to be used in class to make a selection for a year-end get-together.

2. Lead a discussion to determine at least four possible locations and ten factors.

3. Have the class agree on weighting factors for each criteria.

4. Perform the calculations and make the selection.

5. Discuss with the class why the analysis led to the selection in step 2 and whether you would change any of the criteria or weights.

6. Ask the class members whether they feel more in agreement with the decision after going through this process.

Civil Engineering, Engineering

  • Category:- Civil Engineering
  • Reference No.:- M91789604

Have any Question?


Related Questions in Civil Engineering

Assignmenta continuous three spans beam with

Assignment A continuous three spans beam with centre-to-centre distance of 6 m supports 150 mm thick one-way slabs as shown below. The beams have clear spans of 8 m, 9 m, and 8 (face-to-face of 400 mm square columns). Th ...

Civilyou are provided with bill of quantities prepared

Civil You are provided with bill of quantities prepared separately, priced and submitted by 3 con- tractors (A,B,C found on LMS) in respect of a proposed project (see appendix for drawings). The site is located on Mt. Al ...

Masonry design assignmentquestion 1 - derivation of seismic

MASONRY DESIGN ASSIGNMENT Question 1 - Derivation of seismic actions on building a) Determine the storey seismic weights (Wi) for each suspended level of the building, hence the seismic weight (Wt) of the entire building ...

Assignment -ewb design report format - cover page - the as

Assignment - EWB Design Report Format - Cover page - The as EWB project Table of content Introduction about -EWB and CRDT (Cambodian Rural development team) Background about Cambodia - Economic, Weather, People - living ...

Task details the client is doing masters in civil

Task Details: The client is doing Masters in Civil Engineering. He needs a Technical Paper on Earthquake pertaining to Geology and Rock Mechanics. There should be a through discussion of Earthquake in relation to the men ...

Aimthis assignment aims to demonstrate the structural

Aim: This assignment aims to demonstrate the structural design requirements of a glazed façade in a multi-storey building. Among other requirements, the glazed façade is required to comply with Australian Standard AS 204 ...

1 aimthe assignment aims to develop the ability to analyse

1. Aim The assignment aims to develop the ability to analyse, evaluate, research plan and manage a major building project through individual and group participation (ideally 4-6 people).Refer to vUWS for the DA plans and ...

Aimthis assignment aims to demonstrate the structural

Aim: This assignment aims to demonstrate the structural design requirements of a glazed façade in a multi-storey building. Among other requirements, the glazed façade is required to comply with Australian Standard AS 204 ...

Masonry design assignmentquestion 1 - derivation of seismic

MASONRY DESIGN ASSIGNMENT Question 1 - Derivation of seismic actions on building a) Determine the storey seismic weights (Wi) for each suspended level of the building, hence the seismic weight (Wt) of the entire building ...

Assessment taskpractical investigationinstructions- it is

Assessment Task Practical Investigation Instructions: - It is very important that you read these instructions. - The hardcopy of the Assignment report, with the Assignment cover sheet, should be submitted to the Assignme ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As