It is proposed to use liquid petroleum gas lpg to fuel, Ask an Expert

Engineering

It is proposed to use Liquid Petroleum Gas (LPG) to fuel spark-ignition engines. A typical sample of the fuel on a volume basis consists of:

70% propane C3H8; 5% butane C4H10; and 25% propane C3H6

The higher heating values of the fuels are 50.38 MJ/kg for propane, 49.56 MJ/kg for butane, and 48.95 MJ/kg for propane.

a) Work out the overall combustion reaction for stoichiometric combustion of 1 mole of LPG with air, and determine the stoichiometric F/A and A/F ratios.

b) What are the higher and lower heating values per unit mass of LPG?

View complete question

Mechanical Engineering, Engineering

Category:- Mechanical Engineering
Reference No.:- M91247611

Have any Question?Write your Review or question?

Related Questions in Mechanical Engineering

Materials behaviour from atoms to bridges assignment -

Materials Behaviour from Atoms to Bridges Assignment - Distributed loads and static equilibrium (Please note: you should show your steps with necessary figures) Q1. Two beam sections are jointed at C and supported at A b ...

Mechanical engineering assignment task - solve the given

Mechanical Engineering Assignment Task - Solve the given problem. Task 1 - A spring with a one-turn loop of 40mm mean radius is formed from a round section of wire having 5 mm diameter. The straight tangential legs of th ...

Fluid mechanics assignment - finite control volume analysis

Fluid Mechanics Assignment - Finite Control Volume Analysis and Dimensional Analysis Q1. The wind blows through a 7ft × 10ft garage door opening with a speed of 5 ft/s as shown in the figure. Determine the average speed, ...

Question - truss structureconsider the three membered

Question - Truss Structure Consider the three membered planar truss structure shown in the figure below. All members of the truss have identical square cross-sectional area (A) of 25 mm x 25 mm, and Youngs Modulus (E) = ...

Projectflow processing of liquor in a mineral refining

Project Flow Processing of Liquor in a Mineral Refining Plant The aim of this project is to design a flow processing system of liquor (slurry) in a mineral (aluminum) refining plant. Aluminum is manufactured in two phase ...

The aim of the project is to demonstrate certain aspects of

The aim of the project is to demonstrate certain aspects of engineering materials in different applications. The projects will be assessed on the basis of a written Research Report. The report should clearly show what yo ...

Assignment -q1 explain the difference between the

Assignment - Q1. Explain the difference between the metacentric height of a ship during 'Partially Afloat condition and 'Free Floating' condition; aid a sketch to support your answer. Q2. With the aid of sketches, explai ...

Alocate ten minutes for the presentationuse audio visual

Allocate ten minutes for the presentation Use audio / visual / technological supports / aids where appropriate Use a minimum of 3 properly referenced articles. THEMES PRESENTATION TOPIC MEMORY Discuss the three learning ...

The aim of the project is to demonstrate certain aspects of

Questions -q1 a qualitative estimate of the effect of a

Questions - Q1. A qualitative estimate of the effect of a wind-tunnel contraction (Figure) on turbulent motion can be obtained by assuming that the angular momentum of eddies does not change through the contraction. Let ...

4,153,160 Questions Asked
13,132 Experts
2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Recent Questions

Ask Mechanical Engineering Expert

Engineering

Related Questions in Mechanical Engineering

Materials behaviour from atoms to bridges assignment -

Mechanical engineering assignment task - solve the given

Fluid mechanics assignment - finite control volume analysis

Question - truss structureconsider the three membered

Projectflow processing of liquor in a mineral refining

The aim of the project is to demonstrate certain aspects of

Assignment -q1 explain the difference between the

Alocate ten minutes for the presentationuse audio visual

The aim of the project is to demonstrate certain aspects of

Questions -q1 a qualitative estimate of the effect of a

Ask Experts for help!!

Looking for Assignment Help?

Why might a bank avoid the use of interest rate swaps even

Describe the difference between zero coupon bonds and

Compute the present value of an annuity of 880 per year

Compute the present value of an 1150 payment made in ten

Compute the present value of an annuity of 699 per year

Follow Us