Ask Question, Ask an Expert

+61-413 786 465

info@mywordsolution.com

Ask Mechanical Engineering Expert

Initial structure and requirements:

In the evening after the panel, various interested parties gathered in a smoke-filled room and asked themselves if a common translator was possible in real. The room had the right combination of people at the right time. This included an Air Force ICAM representative eager to fund such an effort and a National Bureau of Standards (NBS) representative who, following a call to his boss at home for a sleepy approval, was eager to champion it. This entire initiative was therefore initiated with a $50,000 contract that established the effort's initial structure & requirements :

  • An NBS representative was placed in the lead 2;
  • Two primary IGES committees were formed: the Steering Committee to manage the effort and a Working Committee to carry out technical work;
  • A draft was to be delivered in three months.

With the basics decided, conversation turned to a name for this new translation project. The group nixed the idea "Universal Translator" to ignore offending those in ANSI, who may have interpreted the project like a way to displace the years of attempt already put towards a Y14.26 standard. A minimalist approach was recommended :

I           Interim, to recommend that it would not replace ANSI's work;

G          Graphics, not geometry, to acknowledge that academics can come up with        superior mathematical descriptions;

E          Exchange, to recommend that it would not dictate how vendors should implement their internal database; and

S          Specification, not to be as imposing like a standard.

The panel reported on the second day, and the wheels were set in motion to make an "IGES." Once the panel admitted that a common translation mechanism was feasible, it was impossible to prevent the momentum of the customers' enthusiasm and expectations. Applicon and Computer Vision agreed to open up their internal databases, GE accessible its neutral database, & Boeing offered the structure of its Computer Integrated Information Network (CIIN) database. GE and Boeing both contributed their existing translators. A core team was composed that included representatives from NBS, Boeing, and GE. Team members had closely worked with each vendor on internal integration projects. This prior experience built up the expertise and trust needed to craft a solution in a very short time, & neither vendor felt this gave an unfair advantage to the other.

Mechanical Engineering, Engineering

  • Category:- Mechanical Engineering
  • Reference No.:- M9519641

Have any Question?


Related Questions in Mechanical Engineering

Life cycle assessmentfor your chosen service eg white

LIFE CYCLE ASSESSMENT For your chosen service (e.g. white board markers), identify two alternatives of getting the service (e.g. brand A, brand B). Choose the most environmentally friendly option by conducting life cycle ...

Mechanical engineering assignment task - solve the given

Mechanical Engineering Assignment Task - Solve the given problem. Task 1 - A spring with a one-turn loop of 40mm mean radius is formed from a round section of wire having 5 mm diameter. The straight tangential legs of th ...

The aim of the project is to demonstrate certain aspects of

The aim of the project is to demonstrate certain aspects of engineering materials in different applications. The projects will be assessed on the basis of a written Research Report. The report should clearly show what yo ...

Question - truss structureconsider the three membered

Question - Truss Structure Consider the three membered planar truss structure shown in the figure below. All members of the truss have identical square cross-sectional area (A) of 25 mm x 25 mm, and Youngs Modulus (E) = ...

Fluid mechanics assignment - finite control volume analysis

Fluid Mechanics Assignment - Finite Control Volume Analysis and Dimensional Analysis Q1. The wind blows through a 7ft × 10ft garage door opening with a speed of 5 ft/s as shown in the figure. Determine the average speed, ...

Assignment - machine learning for signal processingproblem

Assignment - Machine Learning for Signal Processing Problem 1: Instantaneous Source Separation 1. As you might have noticed from my long hair, I've got a rock spirit. However, for this homework I dabbled to compose a pie ...

Structural mechanics questions -q1 a 150-lb bucket is

Structural Mechanics Questions - Q1. A 150-lb bucket is suspended from a cable on the wooden frame. Determine the resultant internal loadings on the cross section at D, and at E. Q2. The shaft is supported at its ends by ...

Questions -q1 a qualitative estimate of the effect of a

Questions - Q1. A qualitative estimate of the effect of a wind-tunnel contraction (Figure) on turbulent motion can be obtained by assuming that the angular momentum of eddies does not change through the contraction. Let ...

Projectflow processing of liquor in a mineral refining

Project Flow Processing of Liquor in a Mineral Refining Plant The aim of this project is to design a flow processing system of liquor (slurry) in a mineral (aluminum) refining plant. Aluminum is manufactured in two phase ...

Fluid mechanics assignment - viscous flow in pipesq1 as

Fluid Mechanics Assignment - Viscous Flow in Pipes Q1. As shown in the figure below, water "bubbles up" 3 in. above the exit of the vertical pipe attached to three horizontal pipe segments. The total length of the 0.75-i ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As