Ask Mechanical Engineering Expert

Illustrate about the three authors of IGES

In 1977, the three authors of The Initial Graphics Exchange Specification were recognized collectively for their contributions to the development of IGES Version 1.0 by receiving the AIMTECH Joseph Marie Jacquard Memorial Award. The first author, Roger Nagel, was a NBS staff member at the time and is now the Harvey Wagner Professor of Manufacturing Systems Engineering in the Electrical Engineering and Computer Science Department at Lehigh University. He created Lehigh's Robotics Research Institute, established and directed the Manufacturing Systems Engineering Program, and served as Executive Director of Lehigh's Iacocca Institute for Competitiveness Research. While an employee of NIST, Nagel was a key member of the scientific team developing the Factory Hierarchical Control System in the Robotics Group. This work on hierarchical control systems, performed with James Albus, Tony Barbera, and Gordon Vanderbrug, has been the basis of hundreds of computer-based control systems for automation over the last 20 years. Nagel continues to serve as a technical advisor and consultant to NIST's Manufacturing Engineering Laboratory.

The other two authors were from industry. Walt Braithwaite is currently Corporate Vice President for Company Offices Administration at the Boeing Company. He has held numerous positions within Boeing, including Director of Program Management for the 737 and 757 airplane programsand Chief of Engineering Operations for the 747 and 767 programs. As the lead engineer responsible for technical direction in developing an information network to integrate computer-aided design and computer-aided manufacturing, he led development of Boeing's common data format andtranslators, which were used as a basis for developing the IGES protocol. Philip Kennicott joined the General Electric Research Laboratory in 1961 where he made contributions in the fields of x-ray crystallography and spark-source mass spectrography. As a consultant to General Electric's Computer Aided Design Center, he was instrumental in making General Electric the largest user of CAD/CAM equipment in the world in the 1970s. This work led to the concept of a neutral database, the basis for the General Electric contribution to IGES. Within the IGES community, Kennicott served as a leader of many technical activities, including Editor of the continually evolving IGES standard. He also led a technical team to develop the Department of Energy Data Exchange Format, the first IGES application protocol. He continued this work at Sandia National Laboratories in 1989 and retired from Sandia in 1997.

 

Mechanical Engineering, Engineering

  • Category:- Mechanical Engineering
  • Reference No.:- M9573490

Have any Question?


Related Questions in Mechanical Engineering

The aim of the project is to demonstrate certain aspects of

The aim of the project is to demonstrate certain aspects of engineering materials in different applications. The projects will be assessed on the basis of a written Research Report. The report should clearly show what yo ...

Force exerted by jet on moving cart1 you need to determine

Force Exerted By Jet On Moving cart. 1. You need to determine the velocity of water that comes out from the nozzle of this system. need the equation please formulate the equation. 2. This water will strike a small cart a ...

Mechanical engineering assignment task - solve the given

Mechanical Engineering Assignment Task - Solve the given problem. Task 1 - A spring with a one-turn loop of 40mm mean radius is formed from a round section of wire having 5 mm diameter. The straight tangential legs of th ...

Projectflow processing of liquor in a mineral refining

Project Flow Processing of Liquor in a Mineral Refining Plant The aim of this project is to design a flow processing system of liquor (slurry) in a mineral (aluminum) refining plant. Aluminum is manufactured in two phase ...

Heat transfer and combustionyou will need graph paper a

HEAT TRANSFER AND COMBUSTION You will need graph paper, a calculator, a copy of Appendix 1 from lesson HTC - 4 - 2 and access to steam tables to answer this TMA. 1. A fuel gas consists of 75% butane (C 4 H 10 ), 10% prop ...

Assignment -q1 explain the difference between the

Assignment - Q1. Explain the difference between the metacentric height of a ship during 'Partially Afloat condition and 'Free Floating' condition; aid a sketch to support your answer. Q2. With the aid of sketches, explai ...

Materials behaviour from atoms to bridges assignment -

Materials Behaviour from Atoms to Bridges Assignment - Distributed loads and static equilibrium (Please note: you should show your steps with necessary figures) Q1. Two beam sections are jointed at C and supported at A b ...

Questions -q1 a qualitative estimate of the effect of a

Questions - Q1. A qualitative estimate of the effect of a wind-tunnel contraction (Figure) on turbulent motion can be obtained by assuming that the angular momentum of eddies does not change through the contraction. Let ...

Assignment - machine learning for signal processingproblem

Assignment - Machine Learning for Signal Processing Problem 1: Instantaneous Source Separation 1. As you might have noticed from my long hair, I've got a rock spirit. However, for this homework I dabbled to compose a pie ...

Problem -a long pipe od 1413 mm id 1318 mm kp 20 wmk

Problem - A long pipe (OD = 141.3 mm, ID =131.8 mm, k p = 20 W/m.K) supplies hot pressurized liquid water at 400 K to a heater in a factory. The pipe has an insulation thickness of 100 mm. A new efficient heater replaces ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As