Ask Electrical & Electronics Expert

If one body is positively charged and another body is negatively charged, free electrons tend to
A. move from the negatively charged body to the positively charged body.
B. move from the positively charged body to the negatively charged body.
C. remain in the negatively charged body.
D. remain in the positively charged body.

2. A battery consists of five dry cells connected in series. If the voltage developed by each cell is 1.5 V, the total voltage developed by the battery is
A. 0.3 V.
B. 1.5 V.
C. 5.0 V.
D. 7.5 V.

3. The grid in a high-vacuum triode is usually kept negatively charged with respect to the cathode so that the electrons may be
A. accelerated toward the anode.
B. accelerated toward the cathode.
C. attracted to the anode instead of the grid.
D. attracted to the cathode instead of the grid.

4. An example of an atom that has no charge is one that has
A. 2 protons, 2 electrons, and 1 neutron.
B. 1 proton, 2 electrons, and 3 neutrons.
C. 3 protons, 1 electron, and 3 neutrons.
D. 3 protons, 2 electrons, and 1 neutron.

5. If an electrically uncharged body is contacted by an electrically charged body, the uncharged body will
A. develop the opposite charge as the charged body.
B. remain a neutrally charged body.
C. develop the same charge as the charged body.
D. neutralize the charged body.

6. What bias conditions must be present for the normal operation of a transistor amplifier?
A. The emitter-base junction must be reverse biased, and the collector-base junction must be forward biased.
B. The emitter-base junction must be forward biased, and the collector-base junction must be reverse biased.
C. Both junctions must be reverse biased.
D. Both junctions must be forward biased.

7. When an electric current flows through a long conductor, each free electron moves
A. from one end of the conductor to the other end.
B. with a speed of 300,000,000 m/s.
C. back and forth between the ends of the conductor.
D. through a relatively short distance.

8. If the resistance of an electric circuit is 12 ohms and the voltage in the circuit is 60 V, the current flowing through the circuit is
A. 0.2 A.
B. 5 A.
C. 60 A.
D. 720 A.

9. Electrons are emitted from a conductor when the conductor is
A. exposed to weak light.
B. cooled rapidly.
C. bombarded by high-speed electrons.
D. subjected to a small voltage.

10. A circuit contains two devices that are connected in parallel. If the resistance of one of these devices is 12 ohms and the resistance of the other device is 4 ohms, the total resistance of the two devices is
A. 0.0625 ohms.
B. 0.333 ohms.
C. 3 ohms.
D. 16 ohms.

11. When a PNP transistor is connected in a circuit in the manner shown in Figure 52 of Electricity and Electronics, it can be used as a power amplifier because
A. the output current will be much smaller than the input current.
B. the output current will be much larger than the input current.
C. the output voltage will be much smaller than the input voltage.
D. the output voltage will be much larger than the input voltage.

12. The function of a capacitor in an electric circuit is to
A. allow current flow between its plates.
B. measure the amount of current in the circuit.
C. increase circuit power.
D. store electric charges.

13. In a cathode ray tube, the number of electrons that reach the fluorescent screen is controlled by the
A. anode.
B. cathode.
C. deflecting plate.
D. grid.

14. Which of the following frequencies falls in the range of RF waves used by commercial radio broadcasting stations?
A. 60 Hz
B. 6,000 Hz
C. 600,000 Hz
D. 6,000,000 Hz

15. To use your left hand to determine the direction of the voltage developed in a moving conductor in a stationary magnetic field, you must point your
A. thumb in the direction of the magnetic flux.
B. thumb in the direction of the electromagnetic force.
C. forefinger in the direction of the lines of force.
D. forefinger in the direction of the motion.

16. A complete circuit contains two parallel-connected devices and a generator for providing the electromotive force. The resistance of the first device is 12 ohms, the resistance of the second device is 4 ohms, and the voltage developed by the generator is 40 V. What is the magnitude of the current flowing through the first device?
A. 3.33 A
B. 8 A
C. 10 A
D. 13.32 A

17. A transformer has a primary voltage of 115 V and a secondary voltage of 24 V. If the number of turns in the primary is 345, how many turns are in the secondary?
A. 8
B. 72
C. 690
D. 1,653

18. Look at the circuit shown in Figure A-1. If you want to stop the current flow through Device 3 in the circuit, which one of the following single switches should you open?
A. Switch S2
B. Switch S3
C. Switch S4
D. Switch S5

FIGURE A-1

19. An electric heating element is connected to a 110 V circuit and a current of 3.2 A is flowing through the element. How much energy is used up during a period of 5 hours by the element?
A. 352 Wh
B. 550 Wh
C. 1,760 Wh
D. 2,580 Wh

20. The magnitude of the voltage induced in a conductor moving through a stationary magnetic field depends on the _______ and the _______ of the conductor.
A. length, speed
B. distance, circumference
C. resistance, current
D. color, capacitance

21. If a bar of copper is brought near a magnet, the copper bar will be
A. attracted by the magnet.
B. unaffected by the magnet.
C. repelled by the magnet.
D. made into an induced magnet.

22. When all parts of a circuit are composed of conducting materials, the circuit is said to be
A. parallel.
B. shorted.
C. open.
D. closed.

23. When an electron is displaced in a semiconductor, the hole that's left behind is
A. attracted to the negative terminal of the voltage source.
B. incapable of carrying a charge.
C. attracted to the anode of the voltage source.
D. considered an impurity in the crystal.

24. Including a full-wave rectifier in an AC circuit will yield a(n) _______ current.
A. intermittent direct
B. intermittent alternating
C. continuous direct
D. continuous alternating

25. Suppose that you're facing a straight current-carrying conductor, and the current is flowing toward you. The lines of magnetic force at any point in the magnetic field will act in
A. the same direction as the current.
B. a clockwise direction.
C. the direction opposite to the current.
D. a counterclockwise direction.

Electrical & Electronics, Engineering

  • Category:- Electrical & Electronics
  • Reference No.:- M9707360

Have any Question?


Related Questions in Electrical & Electronics

Question 1for the ce amplifier in figure 1 given the

Question 1 For the CE amplifier in Figure (1), given the following component parameters: Parameter Value β DC , β AC 150 V BE 0 . 7 V V CC 12 V R C 820 ? R E 1 100 ? R E 2 220 ? R 1 20 k? R 2 5 . 2 k? R L 100 k? C 1 , C ...

Question -i a star-connected three-phase synchronous

Question - (i) A star-connected, three-phase synchronous induction motor takes a current of 10 amps from a 415 volt supply at unity power factor when supplying a steady load. If the synchronous reactance is 5 ohms/phase ...

1 a name the three major groups of contamination and

1. (a) Name the three major groups of contamination and briefly describe their physical characteristics. (b) Where do the above contamination types come from? Give one example of each. 2. Name two processes metrics which ...

Question 1 in the voltage regulator circuit in figure p221

Question 1: In the voltage regulator circuit in Figure P2.21, V 1 = 20 V, V Z = 10 V, R i = 222Ω and P z (max) = 400 mW. (a) Determine I L, I z , and I L , if R L = 380Ω. (b) Determine the value of R L , that will establ ...

Summative assessmentin 2017 sej101 assessment will consist

Summative Assessment In 2017 SEJ101 assessment will consist of nine tasks that will develop a portfolio of your assessed work. Throughout the trimester you will have the opportunity for feedback on all nine tasks before ...

1 a name the three major groups of contamination and

1. (a) Name the three major groups of contamination and briefly describe their physical characteristics. (b) Where do the above contamination types come from? Give one example of each. 2. Name two processes metrics which ...

1 a name the three major groups of contamination and

1. (a) Name the three major groups of contamination and briefly describe their physical characteristics. (b) Where do the above contamination types come from? Give one example of each. 2. Name two processes metrics which ...

Case studythis assignment consists of a written report of

CASE STUDY This assignment consists of a written report of approximately 1000 words and any diagrams in which you are asked to critically compare different process methods used to achieve the same result and show an awar ...

Problem 1 a two-phase servomotor has rated voltage applied

Problem 1: A two-phase servomotor has rated voltage applied to its excitation winding. The torque speed characteristic of the motor with Vc = 220 V, 60 Hz applied to its control phase winding is shown in Fig.1. The momen ...

Electrical engineering questions -q1 two ideal voltage

Electrical Engineering Questions - Q1. Two ideal voltage sources designated as machines 1 and 2 are connected, as shown in the figure below. Given E 1 = 65∠0 o V, E 2 = 65∠30 o V, Z = 3Ω. Determine if Machine 1 is genera ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As