Ask Question, Ask an Expert

+61-413 786 465

info@mywordsolution.com

Ask Mechanical Engineering Expert

Find out also the loss of energy through impact:

Example

1. A bullet weighing 0.1 newton horizontally fired with a velocity of 80 metres/sec hits a wooden block, weighing 0.9 Newton. This penetrates into the block through a distance of 8 cms while the latter is held firmly in a clamp. Find out the average resistance offered by the wooden block to the penetration of the bullet.

2. If the block were free to move on a smooth horizontal plane, find out the penetration of the bullet. Find out also the loss of energy through impact.

Solution

Consider the average resistance of wooden block to the penetration of the bullet be R Newtons.

 (i)        While block is held fixed in a clamp, the whole of Kinetic Energy (KE) of the bullet is lost in doing work of penetration of 8 cm (that means 0.08 metres).

∴ Work done by R = KE of bullet

R × 0.08 = (0.1 × 80 × 80) / (2 × 9.8)

∴ R = 408.16 N.

 (ii)       While the block is free to move horizontally, Consider Vc be the common velocity after impact

∴ (0.1 + 0.9) × Vc / g = (0.1 × 80) /g

∴ Vc  = 8 metres / sec .

Entire KE of the combined mass after impact

=  1 × 82 /2 × 9.8      = 3.27 N. m.                             ---------- (1)

Total KE of the system before impact

= (0.1 × 80 × 80 )/2 g   = 32.65 N-m-------------- (2)

∴ Energy lost in impact (i.e. in causing penetration)

                        = (1) - (2) = 29.38 N.m         ------------ (3)

Neglecting other losses like heat, sound etc. during the process of penetration, if we assume that resistance R absorbs this change in KE given in Eq. (3).

             R × l = 29.38

∴ l = 29.38 /408.16     = 0.072 m.

 Note down that penetration of 7.2 cm under case (ii) is less than that case (i).

N. B.    If the wooden block is free to move on a horizontal surface, it shall continue to move along a constant velocity Vc. Though, if R′ is a resistance offered so that it comes to rest through a distance s′, then

R′ × s′ = KE of the combined mass after the impact.

= 1 ×( Vc)2 / 2 g

Mechanical Engineering, Engineering

  • Category:- Mechanical Engineering
  • Reference No.:- M9519977

Have any Question?


Related Questions in Mechanical Engineering

Life cycle assessmentfor your chosen service eg white board

LIFE CYCLE ASSESSMENT For your chosen service (e.g. white board markers), identify two alternatives of getting the service (e.g. brand A, brand B). Choose the most environmentally friendly option by conducting life cycle ...

Fluid mechanics assignment - viscous flow in pipesq1 as

Fluid Mechanics Assignment - Viscous Flow in Pipes Q1. As shown in the figure below, water "bubbles up" 3 in. above the exit of the vertical pipe attached to three horizontal pipe segments. The total length of the 0.75-i ...

Problem -a long pipe od 1413 mm id 1318 mm kp 20 wmk

Problem - A long pipe (OD = 141.3 mm, ID =131.8 mm, k p = 20 W/m.K) supplies hot pressurized liquid water at 400 K to a heater in a factory. The pipe has an insulation thickness of 100 mm. A new efficient heater replaces ...

Heat transfer and combustionyou will need graph paper a

HEAT TRANSFER AND COMBUSTION You will need graph paper, a calculator, a copy of Appendix 1 from lesson HTC - 4 - 2 and access to steam tables to answer this TMA. 1. A fuel gas consists of 75% butane (C 4 H 10 ), 10% prop ...

Force exerted by jet on moving cart1 you need to determine

Force Exerted By Jet On Moving cart. 1. You need to determine the velocity of water that comes out from the nozzle of this system. need the equation please formulate the equation. 2. This water will strike a small cart a ...

Questions -q1 a qualitative estimate of the effect of a

Questions - Q1. A qualitative estimate of the effect of a wind-tunnel contraction (Figure) on turbulent motion can be obtained by assuming that the angular momentum of eddies does not change through the contraction. Let ...

The aim of the project is to demonstrate certain aspects of

The aim of the project is to demonstrate certain aspects of engineering materials in different applications. The projects will be assessed on the basis of a written Research Report. The report should clearly show what yo ...

1 explain the term critical equipment and provide two clear

1. Explain the term "critical equipment" and provide two clear examples of machinery which falls into this category on board a twin screw motor vessel. 2. Explain the process of Charpy lmpact Testing including sample mar ...

Assignment - machine learning for signal processingproblem

Assignment - Machine Learning for Signal Processing Problem 1: Instantaneous Source Separation 1. As you might have noticed from my long hair, I've got a rock spirit. However, for this homework I dabbled to compose a pie ...

Projectflow processing of liquor in a mineral refining

Project Flow Processing of Liquor in a Mineral Refining Plant The aim of this project is to design a flow processing system of liquor (slurry) in a mineral (aluminum) refining plant. Aluminum is manufactured in two phase ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As