Ask Mechanical Engineering Expert

Evaluate the specific enthalpy - thermodynamics:

Steam is being generated in a boiler at a pressure of 15.25 bar. Calculate the specific enthalpy when

(i)  Steam is dry saturated

 (ii)  Steam is wet saturated having 0.92 as the dryness fraction, and

  (iii)  Steam is already superheated, the temperature of steam being 270°C.

Sol.: Note. Specific enthalpy means enthalpy per unit mass. From steam table which is given below, we get the following data:

 

Absolute pressure (P)

bar

Saturation temperature (t) ºC

Specific enthalpy kJ/kg

Water (hf)

Latent heat (hfg)

15

15.55

198.3

200.0

844.6

852.4

1947

1941

Now  15.55 - 15.25 = 0.30 bar

15.55-15 = 0.55bar

For difference of pressure of 0.55 bar, difference in t (or ts) = 200 - 198.0 = 2.0°C For difference of pressure of 0.30 bar, difference of

t = (2/0.55) × 0.30 =1.091°C. Corresponding to 15.25 bar, perfect value of

t = 200 - 1.091 = 198.909°C

For difference of pressure of 0.55 bar, difference of hf (which is heat of the liquid) = 852.4 - 844.6 = 7.8 kJ/kg For difference of pressure of 0.30 bar, difference of hf  =   (7.8/0.55) × 0.30 = 4.255 kJ/kg. Corresponds to 15.25 bar, exact value of

hf  = 852.4 - 4.255 = 848.145 kJ/kg.

Again, for difference of pressure of 0.55 bar, difference of hfg (which is latent heat of evaporation)

= 1947 - 1941 = 6 kJ/kg.

For difference of 0.30 bar, difference of

hfg  = (6/0.55) × 0.30 = 3.273 kJ/kg. Corresponding to 15.25 bar, perfect value of

hfg = 1941 + 3.273 = 1944.273 kJ/kg

[Greater the pressure of steam generation less is latent heat of evaporation.]

The data computed above are written in a tabular form as below:

 

Absolute pressure (P)

bar

Saturation temperature (t) ºC

Specific enthalpy kJ/kg

Water (hf)

Latent heat (hfg)

15.25

198.909

848.145

1944.273

 

(i) When steam is dry saturated, its enthalpy can be given by

HDry = hf  + hfg  kJ/kg

= 848.145 + 1944.273 = 2792.418 kJ/kg                                           .......ANS

(ii) When steam is wet saturated, its enthalpy can be given by

Hwet = hf  + xhfg   kJ/kg

= 848.145 + 0.92 × 1944.273 = 2636.876 kJ/kg                            .......ANS

(iii) When steam is superheated, its enthalpy can be given by

Hsup = hf  + hfg  + Cp(tsup  - ts) kJ/kg

Mechanical Engineering, Engineering

  • Category:- Mechanical Engineering
  • Reference No.:- M9511629

Have any Question?


Related Questions in Mechanical Engineering

The aim of the project is to demonstrate certain aspects of

The aim of the project is to demonstrate certain aspects of engineering materials in different applications. The projects will be assessed on the basis of a written Research Report. The report should clearly show what yo ...

Force exerted by jet on moving cart1 you need to determine

Force Exerted By Jet On Moving cart. 1. You need to determine the velocity of water that comes out from the nozzle of this system. need the equation please formulate the equation. 2. This water will strike a small cart a ...

Mechanical engineering assignment task - solve the given

Mechanical Engineering Assignment Task - Solve the given problem. Task 1 - A spring with a one-turn loop of 40mm mean radius is formed from a round section of wire having 5 mm diameter. The straight tangential legs of th ...

Projectflow processing of liquor in a mineral refining

Project Flow Processing of Liquor in a Mineral Refining Plant The aim of this project is to design a flow processing system of liquor (slurry) in a mineral (aluminum) refining plant. Aluminum is manufactured in two phase ...

Heat transfer and combustionyou will need graph paper a

HEAT TRANSFER AND COMBUSTION You will need graph paper, a calculator, a copy of Appendix 1 from lesson HTC - 4 - 2 and access to steam tables to answer this TMA. 1. A fuel gas consists of 75% butane (C 4 H 10 ), 10% prop ...

Assignment -q1 explain the difference between the

Assignment - Q1. Explain the difference between the metacentric height of a ship during 'Partially Afloat condition and 'Free Floating' condition; aid a sketch to support your answer. Q2. With the aid of sketches, explai ...

Materials behaviour from atoms to bridges assignment -

Materials Behaviour from Atoms to Bridges Assignment - Distributed loads and static equilibrium (Please note: you should show your steps with necessary figures) Q1. Two beam sections are jointed at C and supported at A b ...

Questions -q1 a qualitative estimate of the effect of a

Questions - Q1. A qualitative estimate of the effect of a wind-tunnel contraction (Figure) on turbulent motion can be obtained by assuming that the angular momentum of eddies does not change through the contraction. Let ...

Assignment - machine learning for signal processingproblem

Assignment - Machine Learning for Signal Processing Problem 1: Instantaneous Source Separation 1. As you might have noticed from my long hair, I've got a rock spirit. However, for this homework I dabbled to compose a pie ...

Problem -a long pipe od 1413 mm id 1318 mm kp 20 wmk

Problem - A long pipe (OD = 141.3 mm, ID =131.8 mm, k p = 20 W/m.K) supplies hot pressurized liquid water at 400 K to a heater in a factory. The pipe has an insulation thickness of 100 mm. A new efficient heater replaces ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As