Ask Mechanical Engineering Expert

Dynamics - Work and Energy

Problem Description

Problem 1:

The crate has a mass of 111 kg and is at rest when it is subjected to the action of the two forces; FA= 200N directed down at qA = 37deg and FB = 1028 N directed upwards at qB = 22deg as shown.

102_Figure1.jpg

Determine (a) the distance it slides in order to reach a speed of 5 m/s and (b) the time it takes to reach this speed. The coefficient of friction between the crate and the surface is mu = 0.21.

Problem 2:

The force F = 52s2 is applied to the 31 kg block, directed as shown, theta = 38deg. At s=0, the block is moving to the right at 2 m/s. Determine (a) the velocity of the block when s = 4 m and (b) the acceleration at this instant. The coefficient of kinetic friction between the block and the surface is muk = 0.12.

1172_Figure2.jpg

Problem 3:

The two blocks A and B have weights WA = 294 lbs and WB = 33 lbs. Starting from rest, the block A attains a speed of 5 ft/s after traveling 8 ft down the incline having an angle theta = 45 deg. Determine the (a) the time to reach this speed and (b) the kinetic coefficient of friction between the incline and block A, muk.

512_Figure3.jpg

Problem 4:

A vehicle has a weight of 28800 lbs and an engine which transmits a constant power of 330 bhp to all four wheels. Determine (a) the vehicle's maximum constant speed while climbing a 7 percent incline and (b) the maximum incline while traveling at a constant 72 mph.

Problem 5:

The elevator E and its freight have a total mass of 1210 kg. Hoisting is provided by a motor with a 70 kW nameplate rating and the 322 kg counter-poise C. If the motor is drawing electric power equal to its nameplate rating while hoisting the elevator at a constant 4.4 mps speed, (a) determine the overall motor efficiency.

Also (b) determine the maximum speed if the efficiency were 100%.

1460_Figure4.jpg

Problem 6:

The 3 lb collar is released from rest at A and travels along the smooth guide. Determine the speed of the collar just before it strikes the stop at B. The spring constant is 3 lb/in and has an unstretched length of 10 inches. R = 14 inches and ht = 16 inches.

817_Figure5.jpg

Problem 7:

Two uncompressed springs of equal length having stiffness kA = 270 N/m and kB= 710 N/m are 'nested' together to form a shock absorber. A 7 kg block dropped from an at rest position above the top of the springs causes the springs to compress 630 mm at the instant the block momentarily stops. (a) Determine the height of the block above the springs. (b) Now repeat this problem and determine the height of the block, but assume the two springs are pre-compressed 315 mm just before the block is dropped.

59_Figure6.jpg

Problem 8:

A tank car coasting freely and horizontally at 4 ft/s is stopped by two spring bumpers A and B having constants kA = 24400 lbs/ft and kB = 44400 lb/ft. If the two springs are initially uncompressed and the change in 'the length of the spring assembly at the instant the car stops is 33.23 inches, determine (a) the weight of the tank car. Now (b) assume each spring is preloaded to F1 = 9500 lbs and determine the Weight of the tank car.

2066_Figure7.jpg

Mechanical Engineering, Engineering

  • Category:- Mechanical Engineering
  • Reference No.:- M92379091
  • Price:- $25

Priced at Now at $25, Verified Solution

Have any Question?


Related Questions in Mechanical Engineering

The aim of the project is to demonstrate certain aspects of

The aim of the project is to demonstrate certain aspects of engineering materials in different applications. The projects will be assessed on the basis of a written Research Report. The report should clearly show what yo ...

Force exerted by jet on moving cart1 you need to determine

Force Exerted By Jet On Moving cart. 1. You need to determine the velocity of water that comes out from the nozzle of this system. need the equation please formulate the equation. 2. This water will strike a small cart a ...

Mechanical engineering assignment task - solve the given

Mechanical Engineering Assignment Task - Solve the given problem. Task 1 - A spring with a one-turn loop of 40mm mean radius is formed from a round section of wire having 5 mm diameter. The straight tangential legs of th ...

Projectflow processing of liquor in a mineral refining

Project Flow Processing of Liquor in a Mineral Refining Plant The aim of this project is to design a flow processing system of liquor (slurry) in a mineral (aluminum) refining plant. Aluminum is manufactured in two phase ...

Heat transfer and combustionyou will need graph paper a

HEAT TRANSFER AND COMBUSTION You will need graph paper, a calculator, a copy of Appendix 1 from lesson HTC - 4 - 2 and access to steam tables to answer this TMA. 1. A fuel gas consists of 75% butane (C 4 H 10 ), 10% prop ...

Assignment -q1 explain the difference between the

Assignment - Q1. Explain the difference between the metacentric height of a ship during 'Partially Afloat condition and 'Free Floating' condition; aid a sketch to support your answer. Q2. With the aid of sketches, explai ...

Materials behaviour from atoms to bridges assignment -

Materials Behaviour from Atoms to Bridges Assignment - Distributed loads and static equilibrium (Please note: you should show your steps with necessary figures) Q1. Two beam sections are jointed at C and supported at A b ...

Questions -q1 a qualitative estimate of the effect of a

Questions - Q1. A qualitative estimate of the effect of a wind-tunnel contraction (Figure) on turbulent motion can be obtained by assuming that the angular momentum of eddies does not change through the contraction. Let ...

Assignment - machine learning for signal processingproblem

Assignment - Machine Learning for Signal Processing Problem 1: Instantaneous Source Separation 1. As you might have noticed from my long hair, I've got a rock spirit. However, for this homework I dabbled to compose a pie ...

Problem -a long pipe od 1413 mm id 1318 mm kp 20 wmk

Problem - A long pipe (OD = 141.3 mm, ID =131.8 mm, k p = 20 W/m.K) supplies hot pressurized liquid water at 400 K to a heater in a factory. The pipe has an insulation thickness of 100 mm. A new efficient heater replaces ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As