Detailed Question: I need my work to be fixed and improved.

it is involving SOLIDWORK design
I need the assumbly file for solidwork to be completed, and when it is done, the part in the assumbly should be converted to virtual
I would like the analysis to be done by solidwork if that not passable, then It could be done by MATLAB or manually. " for the analysis look at the pic and read the description bellow..

"see the attachments for more clarification"

Here is some explinations of how the work should look like: "enjoy"

In the report you must include the following elements:

a. A statement describing the contribution of each team member.

b. A description of the problem you are solving, what solutions already exist (if there are any), and the general concept of what you will do and why it will be better that what already exists.

c. Type synthesis of the mechanism.

d. Performance specifications.

e. Dimensional synthesis. You may use graphical or analytical methods. If your design is too complex to apply the synthesis methods that were taught, that is OK, but that must be explained in the report and you still need to come up with a design in some other way, of course.

f. A position analysis (and/or velocity/acceleration/torque/force analysis, if appropriate). The analysis should test the design for meeting the performance specifications. You may use graphical or analytical methods. Present results clearly, with graphs or tables.

g. Snapshots of the physical model or computer-generated graphics, in multiple positions.

h. Use f. and g. to convince the reader that your design performs according to specifications.

i. Appendices with detailed calculations or any computer code that was used. See section 1.9 of textbook for advice on how to write and structure a proper engineering report.

5. Presentation. Groups present their projects in class in the week of May 2nd. Each presentation is 8 minutes, followed by 2 minutes of questions and discussion. Each group member must contribute to the presentation.

Because the presentation is so short, do not go into too much detail. Imagine you work in a company and you need to pitch your design to management, and convince them to invest in further development of your design into a product. They need to see three things: (1) that your design solves an important problem, (2) that you know what you are doing, and (3) that your design will work as intended.

Attachment:- assignment-report.rar

Attachment:- parts with assembly.rar