Ask Question, Ask an Expert

+61-413 786 465

info@mywordsolution.com

Ask Civil Engineering Expert

Design and Construction of Water Works

Note: Present your work with Word, Excel and AutoCAD drawing!!!

1. Explain all types of dam foundation treatment of each with example and net sketch.

2. Explain all types of river diversion methods for dam construction.

3. What factors you will keep in mind while selecting a suitable site for a dam reservoir?

4. What is mean by a Reservoir? Discuss briefly the difference types of reservoirs and the purpose served by each type.

5. Describe briefly the techniques that are employed for computing the storage capacity of a reservoir for different water surface elevations.

6. What is mean by Dam? What are the difference materials that are commonly used for dam construction and what are their comparative advantages and disadvantages?

7. Discuss the geological and topographical features which affect the selection of the type of dam.

8. What are Arch and Buttress dams? Illustrate with sketches and mention site conditions favorable for construction of such dams.

9. Discuss the factors which are considered in the selection of the site for a proposed dam. It is assumed that the type of the dam has already been selected for the project.

10. What useful purpose is served by a dam? What are the ill effects of dam construction?

11. How do you classify dams according to:
a. their use
b. hydraulic design
c. material of construction

12. Discuss the various factors which govern the selection of a particular type of dam for a particular project

13. What are the main points to be considered while selecting a site for a gravity dam construction?

14. Explain briefly with neat sketches the different forces that may act on a gravity dam. Indicate their magnitudes, directions and locations.

15. Explain how uplift considerations affect the design of gravity dams.

16. What measures can be adopted to reduce the undesirable effects due to uplift in such cases?

17. Determine :
a. The normal stress;
b. The principal stress;
c. The shear friction factor at base of figure below.

2263_figure.jpg

18. Figure shows the section of a concrete gravity dam. Check the stability of this dam section at the base.

341_figure1.jpg

Civil Engineering, Engineering

  • Category:- Civil Engineering
  • Reference No.:- M92522118
  • Price:- $140

Guranteed 48 Hours Delivery, In Price:- $140

Have any Question?


Related Questions in Civil Engineering

Assignment -ewb design report format - cover page - the as

Assignment - EWB Design Report Format - Cover page - The as EWB project Table of content Introduction about -EWB and CRDT (Cambodian Rural development team) Background about Cambodia - Economic, Weather, People - living ...

Task details the client is doing masters in civil

Task Details: The client is doing Masters in Civil Engineering. He needs a Technical Paper on Earthquake pertaining to Geology and Rock Mechanics. There should be a through discussion of Earthquake in relation to the men ...

Assessment taskpractical investigationinstructions- it is

Assessment Task Practical Investigation Instructions: - It is very important that you read these instructions. - The hardcopy of the Assignment report, with the Assignment cover sheet, should be submitted to the Assignme ...

Civilyou are provided with bill of quantities prepared

Civil You are provided with bill of quantities prepared separately, priced and submitted by 3 con- tractors (A,B,C found on LMS) in respect of a proposed project (see appendix for drawings). The site is located on Mt. Al ...

Aimthis assignment aims to demonstrate the structural

Aim: This assignment aims to demonstrate the structural design requirements of a glazed façade in a multi-storey building. Among other requirements, the glazed façade is required to comply with Australian Standard AS 204 ...

1 aimthe assignment aims to develop the ability to analyse

1. Aim The assignment aims to develop the ability to analyse, evaluate, research plan and manage a major building project through individual and group participation (ideally 4-6 people).Refer to vUWS for the DA plans and ...

The drainage system of a cantilever wall shown in below

The drainage system of a cantilever wall shown in below figure, became blocked after a heavy rainstorm and the groundwater level, which was originallybelow the base, rose to1.5 (m) below the surface. Determine the stabil ...

Masonry design assignmentquestion 1 - derivation of seismic

MASONRY DESIGN ASSIGNMENT Question 1 - Derivation of seismic actions on building a) Determine the storey seismic weights (Wi) for each suspended level of the building, hence the seismic weight (Wt) of the entire building ...

Masonry design assignmentquestion 1 - derivation of seismic

MASONRY DESIGN ASSIGNMENT Question 1 - Derivation of seismic actions on building a) Determine the storey seismic weights (Wi) for each suspended level of the building, hence the seismic weight (Wt) of the entire building ...

Assignmenta continuous three spans beam with

Assignment A continuous three spans beam with centre-to-centre distance of 6 m supports 150 mm thick one-way slabs as shown below. The beams have clear spans of 8 m, 9 m, and 8 (face-to-face of 400 mm square columns). Th ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As