Ask Question, Ask an Expert

+1-415-315-9853

info@mywordsolution.com

Ask Electrical & Electronics Expert

problem 1: List at least two discriminations between the Klystron and TWT’s.

problem 2: Describe the problem of inter electrode capacitance and lead inductance of wave frequencies.

problem 3: Describe the principle of TWT all along with neat sketch?

problem 4: Derive an expression for the maximum possible theoretical effectiveness of a reflex Klystron.

problem 5: List two benefits of using Microwave frequency over the low frequency?

problem 6: Define the term Transit time effect.

problem 7: What is the fundamental difference between TWT and Magnetron?

problem 8: Why at microwave frequency we talk of traveling waves with related powers rather than voltages and currents?

problem 9: What do you mean by velocity modulation? How is it distinct from normal modulation? Describe how velocity modulation is used in klystron amplifier.

problem 10: What are slow wave structures? Describe how a helical TWT accomplish the amplification. 

Electrical & Electronics, Engineering

  • Category:- Electrical & Electronics
  • Reference No.:- M97436

Have any Question? 


Related Questions in Electrical & Electronics

An industrial load is connected across a three-phase

An industrial load is connected across a three-phase, Y-connected source of 4.5 KV (line-to-line). The real power of the load is 160kW, and its power factor is 0.8 lagging: a. Compute the reactive power of the load. b. A ...

At a particular temperature the fraction of ionized atoms

At a particular temperature, the fraction of ionized atoms in a piece of silicon is IM". If the material is doped to a level of I in 10" with acceptor atoms, what is the net concentration of holes and electrons in the re ...

Determine the quantizing levels in terms of sigma so that

Determine the quantizing levels, in terms of σ, so that the entropy at the output of a quantizer is maximized. Assume that there are six quantizing levels and that the quantizer is a zero-mean Gaussian process as in the ...

Calculate the voltages v1nbspand v2nbspfor the circuit of

Calculate the voltages V 1  and V 2  for the circuit of given figure in phasor form using the voltage divider rule.

The sum of two independent random processes with psdsare

The sum of two independent random processes with PSDs are input to a LTI filter. (a) Determine the Wiener smoothing filter. That is, find the impulse response of the filter that produces an output that is an MMSE estimat ...

How many 100 ma current sources must be connected in

How many 100 mA current sources must be connected in parallel to produce a total current output of 300 mA? Draw a schematic showing the sources connected.

Repeat given problem for a capacitance of 20

Repeat given problem for a capacitance of 20 µF. Problem For the circuit of given figure: a. Determine the time constant of the circuit when the switch is thrown into position 1. b. Find the mathematical expression for t ...

A transformer is energized through a cable whose inductive

A transformer is energized through a cable whose inductive reactance is 3Ω. The phase voltage at the source side of the cable is 8kV. When the transformer is switched on (energized), the crest of the inrush current of th ...

The loop gain of a three-pole amplifier is given bya show

The loop gain of a three-pole amplifier is given by (a) Show that this function will lead to an unstable feedback system.  (b) Insert a dominant pole such that the phase margin is 45 degrees. Assume the original poles re ...

Question 1 design a suitable double-layer lap winding for a

Question 1) Design a suitable double-layer lap winding for a 6-pole dc armature with 18 slots and two coil sides per slot. Give values of front-pitch, brack-pitch and commutator pitch. Draw the developed diagram and show ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

A cola-dispensing machine is set to dispense 9 ounces of

A cola-dispensing machine is set to dispense 9 ounces of cola per cup, with a standard deviation of 1.0 ounce. The manuf

What is marketingbullwhat is marketing think back to your

What is Marketing? • "What is marketing"? Think back to your impressions before you started this class versus how you

Question -your client david smith runs a small it

QUESTION - Your client, David Smith runs a small IT consulting business specialising in computer software and techno

Inspection of a random sample of 22 aircraft showed that 15

Inspection of a random sample of 22 aircraft showed that 15 needed repairs to fix a wiring problem that might compromise

Effective hrmquestionhow can an effective hrm system help

Effective HRM Question How can an effective HRM system help facilitate the achievement of an organization's strate