Ask Civil Engineering Expert

COMPARE INDIAN CONSTRUCTION WITH CONSTRUCTION IN DEVELOPED NATIONS

1. Different type of methods used in Indian construction for different type of constructions

2. Include various big projects that took place in India from the past two decades and the time span they took to complete (like how long two similar projects took to finish with change in decades). Also the budgets the projects used up in completing the projects.

3. Number of projects that went beyond the estimated budget

4. Compare the Indian projects that were took up by national firms and Indian projects took up by international firms. Identifying major differences and check for number of positives and negatives in both.

5. Look after some great constructions in developed countries and the changes that took place in the past decade in those countries.

6. Comparing the rate of change in Indian constructions and developed nations construction.

7. The positive factors of Indian construction.

8. The negative factors that are holding back Indian construction when compared to construction in developed nations.

9. The measures that India should take to be really competent with developed nations in the construction industry.

10. The use of making constructions with partnership of international firms and the losses that may incur when there is an international partner.

11. Where the India stands in the construction industry.

12. Profits India will get from making particular developed nations as international partners.

Requirement

1. Research the various aspects that I'm going to include in my assignment by referring relevant books and journals and the notes of subject.

2. must include the case studies that shows the positives in Indian construction when compared to construction in developed nations as well the negatives in the construction of India when compared to developed nations constructions.

3. must try to discover whether or not change in Indian culture of construction show positive impact on Indian construction.

4. This assignment is not about word numbers and the kind of projects involved but should present one's own analysis of the case studies.

Assignment Requirements

Executive Summary (200-250 words)

- Details of why the assignment was prepared, how it is structured, what the important findings and conclusions are, and what the major recommendations are (This, of course, should be written after you've finished the report).

Table of Contents

- This should be a full comprehensive listing with respective page numbers of executive summary, introduction, main sections, references, etc.

Introduction and/or Background

- Provide a good background to the topic under investigation. You need to provide the information your reader needs to understand to follow your report structure and content.

Main Body

- Keep in mind that your topic must be presented in the context of what this subject is about (i.e. international construction). There is no point in submitting assignment that does not tackle one or more issues related to the industry in the international context.

- Make sure that you have a good structure that helps bringing your argument to life. The materials you are presenting has to flow well (coherent piece of work) to reinforce your argument

- Use case studies/examples (valid evidence) to support your viewpoints.

- You are expected to demonstrate clear thinking and using

Given that this assignment attracts 80% of the total mark, it is important to remember that you are expected to produce a well-researched original piece of work'. Originality simply means that you have thought about, and researched, the topic pretty well.

Conclusions / Recommendations

- Discuss the findings of your analysis and provide recommendations in response to the specific conclusions and lessons learned.

List of References

- Provide a complete list of references - full details of all citations used in the body of the assignment.

Civil Engineering, Engineering

  • Category:- Civil Engineering
  • Reference No.:- M91999769
  • Price:- $90

Priced at Now at $90, Verified Solution

Have any Question?


Related Questions in Civil Engineering

Assignment -ewb design report format - cover page - the as

Assignment - EWB Design Report Format - Cover page - The as EWB project Table of content Introduction about -EWB and CRDT (Cambodian Rural development team) Background about Cambodia - Economic, Weather, People - living ...

Assessment taskpractical investigationinstructions- it is

Assessment Task Practical Investigation Instructions: - It is very important that you read these instructions. - The hardcopy of the Assignment report, with the Assignment cover sheet, should be submitted to the Assignme ...

Task details the client is doing masters in civil

Task Details: The client is doing Masters in Civil Engineering. He needs a Technical Paper on Earthquake pertaining to Geology and Rock Mechanics. There should be a through discussion of Earthquake in relation to the men ...

Aimthis assignment aims to demonstrate the structural

Aim: This assignment aims to demonstrate the structural design requirements of a glazed façade in a multi-storey building. Among other requirements, the glazed façade is required to comply with Australian Standard AS 204 ...

Masonry design assignmentquestion 1 - derivation of seismic

MASONRY DESIGN ASSIGNMENT Question 1 - Derivation of seismic actions on building a) Determine the storey seismic weights (Wi) for each suspended level of the building, hence the seismic weight (Wt) of the entire building ...

Masonry design assignmentquestion 1 - derivation of seismic

MASONRY DESIGN ASSIGNMENT Question 1 - Derivation of seismic actions on building a) Determine the storey seismic weights (Wi) for each suspended level of the building, hence the seismic weight (Wt) of the entire building ...

Aimthis assignment aims to demonstrate the structural

Aim: This assignment aims to demonstrate the structural design requirements of a glazed façade in a multi-storey building. Among other requirements, the glazed façade is required to comply with Australian Standard AS 204 ...

Assignmenta continuous three spans beam with

Assignment A continuous three spans beam with centre-to-centre distance of 6 m supports 150 mm thick one-way slabs as shown below. The beams have clear spans of 8 m, 9 m, and 8 (face-to-face of 400 mm square columns). Th ...

The drainage system of a cantilever wall shown in below

The drainage system of a cantilever wall shown in below figure, became blocked after a heavy rainstorm and the groundwater level, which was originallybelow the base, rose to1.5 (m) below the surface. Determine the stabil ...

Civilyou are provided with bill of quantities prepared

Civil You are provided with bill of quantities prepared separately, priced and submitted by 3 con- tractors (A,B,C found on LMS) in respect of a proposed project (see appendix for drawings). The site is located on Mt. Al ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As