Ask Question, Ask an Expert

+61-413 786 465

info@mywordsolution.com

Ask Civil Engineering Expert

Carrousel 3000 is also called the space solution; this feature of carrousel has the "deep" solution. This material offers the luxury of water depths of up to 8 meters. Thus this technique reduces the needed surface of land When the surface aerators are equipped with draft tubes, depths of the aeration zone of up to 8meters can be realised, resulting in a considerably reduced footprint.A draft tube is avertical cylinder underneath an aerator, which extends almost down to the bottom. It enables the aerator to draw (oxygen deficient) water from the bottom of the tank, thereby ensuring proper mixing over the entire tank depth. This principle has proven to work well in practice for rectangular aeration tanks. However, the necessary propulsion effect of an aerator in aCarrouselbasin is greatly reduced by the draft tube. This is overcome by installing additional propulsion means, propellers, in the channels of theCarrouselbasin. Carrousel 3000 still combines the ideal features of the original Carrousel and Carrousel 2000.

The Carrousel 3000 system before the Carrousel 2000 system coupled with a biological selection area. The biological selection area is the uses of high organic loading filter bacteria, inhibit the growth of filamentous bacteria, improve the removal of pollutants, the subsequent process principal with the Carrousel 2000 system.

Improved performance in the Carrousel 3000 system: One is to increase the pool depth up to 7.5 ~ 8m, concentric circles, shared wall, reducing the footprint, reduce the cost while improving the low temperature tolerance (up to 7 ° C); clever design of the aeration equipment, surface aerators installed draft tube, suction mixture of oxygen, the use of underwater propulsion solve the flow rate problem; Third, the use of state-of-the-art aeration controller Qute (it the use of a multi-variable control mode).Fourth, the use of integrated design, starting from the centre, including the following cyclic continuous process unit: into the wells and for the return activated sludge trap; consists of four parts selection pool and anaerobic tank.This is outside the three-aerator and a pre-DE nitrification tank Carrousel 2000 system (Figure 2).Fifth round integration design makes the oxidation ditch without additional pipeline, you can return sludge allocated between the different process units.

i would like a auto cad design of a waste water plant using Carrousel 3000 to have a capacity of 25000m3 of water above is a brief insight about the carrusel 3000 just as a guide measurements may be made up depending on the suiability

Civil Engineering, Engineering

  • Category:- Civil Engineering
  • Reference No.:- M91525095
  • Price:- $30

Priced at Now at $30, Verified Solution

Have any Question?


Related Questions in Civil Engineering

Masonry design assignmentquestion 1 - derivation of seismic

MASONRY DESIGN ASSIGNMENT Question 1 - Derivation of seismic actions on building a) Determine the storey seismic weights (Wi) for each suspended level of the building, hence the seismic weight (Wt) of the entire building ...

Aimthis assignment aims to demonstrate the structural

Aim: This assignment aims to demonstrate the structural design requirements of a glazed façade in a multi-storey building. Among other requirements, the glazed façade is required to comply with Australian Standard AS 204 ...

Assignment -ewb design report format - cover page - the as

Assignment - EWB Design Report Format - Cover page - The as EWB project Table of content Introduction about -EWB and CRDT (Cambodian Rural development team) Background about Cambodia - Economic, Weather, People - living ...

Task details the client is doing masters in civil

Task Details: The client is doing Masters in Civil Engineering. He needs a Technical Paper on Earthquake pertaining to Geology and Rock Mechanics. There should be a through discussion of Earthquake in relation to the men ...

Assignmenta continuous three spans beam with

Assignment A continuous three spans beam with centre-to-centre distance of 6 m supports 150 mm thick one-way slabs as shown below. The beams have clear spans of 8 m, 9 m, and 8 (face-to-face of 400 mm square columns). Th ...

Masonry design assignmentquestion 1 - derivation of seismic

MASONRY DESIGN ASSIGNMENT Question 1 - Derivation of seismic actions on building a) Determine the storey seismic weights (Wi) for each suspended level of the building, hence the seismic weight (Wt) of the entire building ...

1 aimthe assignment aims to develop the ability to analyse

1. Aim The assignment aims to develop the ability to analyse, evaluate, research plan and manage a major building project through individual and group participation (ideally 4-6 people).Refer to vUWS for the DA plans and ...

Assessment taskpractical investigationinstructions- it is

Assessment Task Practical Investigation Instructions: - It is very important that you read these instructions. - The hardcopy of the Assignment report, with the Assignment cover sheet, should be submitted to the Assignme ...

Civilyou are provided with bill of quantities prepared

Civil You are provided with bill of quantities prepared separately, priced and submitted by 3 con- tractors (A,B,C found on LMS) in respect of a proposed project (see appendix for drawings). The site is located on Mt. Al ...

Aimthis assignment aims to demonstrate the structural

Aim: This assignment aims to demonstrate the structural design requirements of a glazed façade in a multi-storey building. Among other requirements, the glazed façade is required to comply with Australian Standard AS 204 ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As