Ask Question, Ask an Expert

+61-413 786 465

info@mywordsolution.com

Ask Mechanical Engineering Expert

BASIC DEFINITIONS - Air transportation:

A civil engineer dealing with airport engineering shall have to know the precise meaning of some terms. These are defined below :

Airfield/Airport

The area of land which contains the facilities needed for the operation of aircraft.

Aerodrome

The area which has facilities like buildings, installations and equipment needed for the operation of aircraft, passengers and goods.

Apron

The area intended to accommodate standing aircraft for the purpose of loading or unloading of passengers and cargo, refuelling and minor maintenance.

Taxiway

A path over which an aircraft may taxi to and from the runway and apron.

Runway

The path over which the aircraft moves when taking off or landing.

Operation Readiness Platform

The area next to the runway end intended for the aircraft to be parked in a state of readiness for taking off.

Holding Apron (Run-up Area)

The portion near the ends of runway for engine run-ups and for aircraft waiting to take off.

Air Traffic Control (ATC) Tower

A tower from where the arrival and departure of aircraft is controlled, and which houses the radar.

Terminal Area

The area that houses the terminal buildings, facilities for loading and unloading of passengers and cargo, apron, vehicle parking and hangars.

Terminal Building

The building which contains facilities for airline operations, handling passengers, customs and immigration and security.

Hangar

A shed for accommodating aircraft for repairs and maintenance.

Shoulders

The area adjacent to a runway intended as a safety measure for aircraft running off the pavement.

Gate

The location from where passengers depart from the terminal building to board the aircraft.

Arrival/ Departure Hall

The hall where passengers enter the terminal building after arrival or await the departure of aircraft.

Security Check Zone

The area where passengers undergo security checks.

Aerobridge

A bridge spanning the terminal building and the entrance door of an aircraft for facilitating quick embarkation and disembarkation of passengers.

STOL

Short take-off and landing, containing short runways.

VASI

Visual Approach Slope Indicator, which is an aid to define the glide path.

Approach Area (Approach Zone)

An area extending outwards from each end of the runway within which no natural or man-made object should project above a safe angle of ascent or descent of an aircraft.

Mechanical Engineering, Engineering

  • Category:- Mechanical Engineering
  • Reference No.:- M9519195

Have any Question?


Related Questions in Mechanical Engineering

Assignment -q1 explain the difference between the

Assignment - Q1. Explain the difference between the metacentric height of a ship during 'Partially Afloat condition and 'Free Floating' condition; aid a sketch to support your answer. Q2. With the aid of sketches, explai ...

1 explain the term critical equipment and provide two clear

1. Explain the term "critical equipment" and provide two clear examples of machinery which falls into this category on board a twin screw motor vessel. 2. Explain the process of Charpy lmpact Testing including sample mar ...

5star questions amp answers1a define heat treatment bname

5 STAR QUESTIONS & Answers 1. A) Define Heat treatment B) Name different types of heat treatment processes C) Write any 4 purposes of Heat treatment 2. Explain various Heat treatment processes 3. A) Compare Thermo plasti ...

Life cycle assessmentfor your chosen service eg white

LIFE CYCLE ASSESSMENT For your chosen service (e.g. white board markers), identify two alternatives of getting the service (e.g. brand A, brand B). Choose the most environmentally friendly option by conducting life cycle ...

Materials behaviour from atoms to bridges assignment -

Materials Behaviour from Atoms to Bridges Assignment - Distributed loads and static equilibrium (Please note: you should show your steps with necessary figures) Q1. Two beam sections are jointed at C and supported at A b ...

Force exerted by jet on moving cart1 you need to determine

Force Exerted By Jet On Moving cart. 1. You need to determine the velocity of water that comes out from the nozzle of this system. need the equation please formulate the equation. 2. This water will strike a small cart a ...

Questions -q1 a qualitative estimate of the effect of a

Questions - Q1. A qualitative estimate of the effect of a wind-tunnel contraction (Figure) on turbulent motion can be obtained by assuming that the angular momentum of eddies does not change through the contraction. Let ...

Heat transfer and combustionyou will need graph paper a

HEAT TRANSFER AND COMBUSTION You will need graph paper, a calculator, a copy of Appendix 1 from lesson HTC - 4 - 2 and access to steam tables to answer this TMA. 1. A fuel gas consists of 75% butane (C 4 H 10 ), 10% prop ...

Question - truss structureconsider the three membered

Question - Truss Structure Consider the three membered planar truss structure shown in the figure below. All members of the truss have identical square cross-sectional area (A) of 25 mm x 25 mm, and Youngs Modulus (E) = ...

Life cycle assessmentfor your chosen service eg white board

LIFE CYCLE ASSESSMENT For your chosen service (e.g. white board markers), identify two alternatives of getting the service (e.g. brand A, brand B). Choose the most environmentally friendly option by conducting life cycle ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As