Assignment
Question1: Multi-view Drawing
Consider the slide shown in Figure 1 below
a) Model (create) the part (.prt)in Creo Parametricand name it Lastname_Final_Q1.
b) Create a drawing file (.drw), showing the necessary views and the isometric view, assuming that the surfaces shown are front, top, and right side (Be sure to include all centerlines)
c) Adjust the scale, if necessary, to cover at least 80 % of the available drawing area
d) Insert an A format and fill in the title block
e) Dimension
f) From the drawing file, create a PDF file (.pdf)
g) Submit the part file at Final_Part_1, the drawing file at Final_Drawing_1, and the PDF file at Final_PDF_1 assignmentsin Moodle
Figure 1
Question2: Auxiliary view Drawing
Consider the Plastic Slide shown in Figure 4(Exercise 7.5 on page 297 of the textbook)
a) Model (create) the part in Creo Parametric and name it Lastname_Final_Q2.
b) Create a drawing file (.drw) showing the necessary views, the isometric view, and one auxiliary view, assuming that front, top, and right side surfaces are shown. (Be sure to include all centerlines)
c) Adjust the scale, if necessary, to occupy at least 80 % of the available drawing area
d) Insert an A format and fill in the title block
e) Dimension
f) Create a PDF file ( .pdf) from the drawing file (drw)
g) Submit the part file at Final_Part_2, the drawing file at Final_Drawing_2, and the PDF file at Final_PDF_2in Moodle
Figure 2
Question 3: Sectional-view Drawing
Download the Centering Bushing shown (Exercise 6.9 on page 245 of the textbook) from Moodle under Week 5
a) Create a drawing showing the necessary views and the isometric view, assuming that front, top, and right side surfaces are shown
b) Adjust the scale, if necessary, to occupy at least 80 % of the available drawing area
c) Convert the right-side view into a fullsection view. The cutting plane passes through the center of the lower hole and is perpendicular to the front surface
d) Insert an A format
e) Do NOT dimension
f) Create a PDF file from the ProE drawing file
g) Submit the drawing file to Final_Darwing_3 and the PDF file at Final_PDF_3 in Moodle
Figure 3