Ask Mechanical Engineering Expert

An electronics company has a contract to deliver 20,000 radios within the next four weeks. The client is willing to pay $20 for each radio delivered by the end of the first week, $18 for those delivered by the end of the second week, $16 by the end of the third week, and $14 by the end of the fourth week. Since each worker can assemble only 50 radios per week, the company cannot meet the order with its present labor force of 40; hence it must hire and train temporary help. Any of the experienced workers can be taken off the assembly line to instruct a class of three trainees; after one week of instruction, each of the trainees can either proceed to the assembly line or instruct additional new classes. At present, the company has no other contracts; hence some workers may become idle once the delivery is completed. All of them, whether permanent or temporary, must be kept on the payroll till the end of the fourth week. The weekly wages of a worker, whether assembling, instructing, or being idle, are $200; the weekly wages of a trainee are $100. The production costs, excluding the workers wages, are $5 per radio.
For example, the company could adopt the following plan.

  • First Week: 10 assemblers, 30 instructors, 90 trainees

- Workers' wages: $8,000
- Trainees' wages: $9,000
- Profit from 500 radios: $7,500
- Net loss: $9,500

  • Second Week: 120 assemblers, 10 instructors, 30 trainees

- Workers' wages: $26,000
- Trainees' wages: $3,000
- Profit from 6,000 radios: $78,000
- Net profit: $49,000

  • Third Week: 160 assemblers

- Workers' wages: $32,000
- Profit from 8,000 radios: $88,000
- Net profit: $56,000

  • Fourth Week: 110 assemblers, 50 idle

- Workers' wages: $32,000
- Profit from 5,500 radios: $49,500
- Net profit: $17,500
This plan, leading to a total net profit of $113,000, is one of many possible plans. The company's aim is to maximize the total net profit.
1. Formulate this problem as an LP (not necessarily in the standard form). Your model sho

 

Mechanical Engineering, Engineering

  • Category:- Mechanical Engineering
  • Reference No.:- M91025998

Have any Question?


Related Questions in Mechanical Engineering

The aim of the project is to demonstrate certain aspects of

The aim of the project is to demonstrate certain aspects of engineering materials in different applications. The projects will be assessed on the basis of a written Research Report. The report should clearly show what yo ...

Force exerted by jet on moving cart1 you need to determine

Force Exerted By Jet On Moving cart. 1. You need to determine the velocity of water that comes out from the nozzle of this system. need the equation please formulate the equation. 2. This water will strike a small cart a ...

Mechanical engineering assignment task - solve the given

Mechanical Engineering Assignment Task - Solve the given problem. Task 1 - A spring with a one-turn loop of 40mm mean radius is formed from a round section of wire having 5 mm diameter. The straight tangential legs of th ...

Projectflow processing of liquor in a mineral refining

Project Flow Processing of Liquor in a Mineral Refining Plant The aim of this project is to design a flow processing system of liquor (slurry) in a mineral (aluminum) refining plant. Aluminum is manufactured in two phase ...

Heat transfer and combustionyou will need graph paper a

HEAT TRANSFER AND COMBUSTION You will need graph paper, a calculator, a copy of Appendix 1 from lesson HTC - 4 - 2 and access to steam tables to answer this TMA. 1. A fuel gas consists of 75% butane (C 4 H 10 ), 10% prop ...

Assignment -q1 explain the difference between the

Assignment - Q1. Explain the difference between the metacentric height of a ship during 'Partially Afloat condition and 'Free Floating' condition; aid a sketch to support your answer. Q2. With the aid of sketches, explai ...

Materials behaviour from atoms to bridges assignment -

Materials Behaviour from Atoms to Bridges Assignment - Distributed loads and static equilibrium (Please note: you should show your steps with necessary figures) Q1. Two beam sections are jointed at C and supported at A b ...

Questions -q1 a qualitative estimate of the effect of a

Questions - Q1. A qualitative estimate of the effect of a wind-tunnel contraction (Figure) on turbulent motion can be obtained by assuming that the angular momentum of eddies does not change through the contraction. Let ...

Assignment - machine learning for signal processingproblem

Assignment - Machine Learning for Signal Processing Problem 1: Instantaneous Source Separation 1. As you might have noticed from my long hair, I've got a rock spirit. However, for this homework I dabbled to compose a pie ...

Problem -a long pipe od 1413 mm id 1318 mm kp 20 wmk

Problem - A long pipe (OD = 141.3 mm, ID =131.8 mm, k p = 20 W/m.K) supplies hot pressurized liquid water at 400 K to a heater in a factory. The pipe has an insulation thickness of 100 mm. A new efficient heater replaces ...

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Why might a bank avoid the use of interest rate swaps even

Why might a bank avoid the use of interest rate swaps, even when the institution is exposed to significant interest rate

Describe the difference between zero coupon bonds and

Describe the difference between zero coupon bonds and coupon bonds. Under what conditions will a coupon bond sell at a p

Compute the present value of an annuity of 880 per year

Compute the present value of an annuity of $ 880 per year for 16 years, given a discount rate of 6 percent per annum. As

Compute the present value of an 1150 payment made in ten

Compute the present value of an $1,150 payment made in ten years when the discount rate is 12 percent. (Do not round int

Compute the present value of an annuity of 699 per year

Compute the present value of an annuity of $ 699 per year for 19 years, given a discount rate of 6 percent per annum. As