Write the specification of LOAD MOVER(detailed of the whole design and precise for automatic control section).

Requirement :

1. It should be able to move 35 kgs.
2. It can be operated wirelessly, manually and automatically.
3. It can detect hindrances and take decision to avoid them.
4. It can store a map of 2 x 3 points to move on automatically.(A, B, C, D, E, F)
5. Map can be updated by serial port.
6. It can take snap of each load and store it in SD card.
7. It can climb a slope of 4 feet.
8. The weight panel should be around 1.5 x 3 feet.
9. It can talk to the customer and respond to fixed five questions.
10. It should run on battery (battery charger).
11. Decide the Processor/ASIC/ASIP/SOC/FPGA .
12. Divide the design into various modules.
13. Is the kernel required if yes which one?
14. Does the project has real time features.
15. Which class of SOC is suitable ?
16. What memories are required ? (SRAM/SDRAM/FLASH/EEPROM)
17. What does be the size of the memories ?
18. Engine control section
19. Wireless control section
20. Automatic control section
21. Weight sensor and Infrared sensor
22. Camera interface
23. Card reader section
24. Audio interfacing section
25. Battery charger section
26. Write the specification document for each section per group.