We have a pumping system that handles dirty fluids with, Ask an Expert

Academics

We have a pumping system that handles dirty fluids with sticky soft particles. For this reason, we are using semi-open impellors on our centrifugal pumps. Our company performs a project that increases the cleanliness of the fluids, and greatly reduces the quantity of sticky soft particles in the liquid that is to be pumped (a filtration project upstream of the pumps).

Now that the fluid has changed, list 3 potential modifications to the pump that would improve pump efficiency / performance.

If you could only do one, which one would you like to do? Why?

View complete question

Chemistry, Academics

Category:- Chemistry
Reference No.:- M9985172

Have any Question?Write your Review or question?

Related Questions in Chemistry

Q1 sodium metal is very active with water therefore

Q1. Sodium metal is very active with water. Therefore, determining the value of a block of sodium will be impossible by water displacement. On the other hand, the density of sodium metal can be found in the chemistry han ...

A paint contains 1800 ppm lead approximately what mass of

A paint contains 180.0 ppm lead. Approximately what mass of lead will be in 1.00 cm ^3 of this paint when 1.00 gal is uniformly applied to 445.0 ft 2 of a wall. The density of the paint is 8.00 lb/gal.

What is the volume of a solution in milliliters that

What is the volume of a solution, in milliliters, that contains 1.5 g LiNO3 and has a concentration of 0.40 M?

A 35g copper cup contains 89g of drinking water the copper

A 35g copper cup contains 89g of drinking water. The copper cup is placed into a cooling device consisting of an insulated container which holds 85g of water equal in temperature to the drinking water. Ammonium chloride ...

A power plant converts the heat energy in coal to

A power plant converts the heat energy in coal to electricity with 35% efficiency. Transmission losses are 10%. A factory then uses that electricity to make hydrogen with 50% efficiency, which is used in a fuel cell to m ...

Asolution is prepared by dissolving 2244 grams of acetic

Asolution is prepared by dissolving 22.44 grams of acetic acid inenough water to make250.0 mL of solution. A 25.00-mL aliquot of NaOH solution is thentitrated with the acetic acid solution. 37.28 mL of the acetic acid so ...

An iron skillet weighing 128kg is heated on a stove to

An iron skillet weighing 1.28kg is heated on a stove to 178°C. Suppose the skillet is cooled to room temperature., 21°C. How much heat energyin joules must be removed to effect this cooling? The specific heat of iron is ...

What roman numeral is required in the name of the following

What roman numeral is required in the name of the following compound? Ag2SO4 What roman numeral is required in the name of the following compound? CuCO3 What roman numeral is required in the name of the following compoun ...

A 250-ml sample of 120 m potassium chloride solution is

A 25.0-mL sample of 1.20 M potassium chloride solution is mixed with 15.0 mL of a 0.900 M lead(II) nitrate solution and this precipitation reaction occurs: 2KCl(aq) + Pb(NO 3 ) 2 (aq) -------> PbCl 2 (s) + 2KNO 3 (aq) Th ...

If 1440 grams of rbcl are dissolved in water to make a

If 14.40 grams of RbCl are dissolved in water to make a solution of 0.224 L, the density is found to be 1.047 g/cm 3 . Calculate the molality of the solute.

4,153,160 Questions Asked
13,132 Experts
2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Recent Questions

Ask Chemistry Expert