The signal for an instrumental method was measured five, Ask an Expert

Academics

The signal for an instrumental method was measured five times in the presence of an unknown concentration of analyte and yielded the following: 10.2, 11.1, 9.7, 9.2, 10.3 mV.

a) Assuming that the noise is random calculate the signal-to-noise ratio.

b) A calibration curve was prepared from series of standards for various concentrations of this analyte and the line of best fit was determined to be S=1.56C + 0.2, where, S, is the signal in mV and, C, is the concentration in ppm (parts per million). Calculate the concentration of analyte.

c) Estimate the detection limit of this instrumental method based on measurement of the S/N for the unknown.

View complete question

Chemistry, Academics

Category:- Chemistry
Reference No.:- M9865351

Have any Question?Write your Review or question?

Related Questions in Chemistry

What mass of solid naoh 970 naoh by mass is required to

What mass of solid NaOH (97.0% NaOH by mass) is required to prepare 1.00 L of a 10.0% solution of NaOH by mass? The density of the 10.0% solution is 1.109 g/mL.

Bob a sales manager for buymore stopped by the grill to

Bob, a sales manager for BuyMore, stopped by The Grill to meet a client for dinner. Bob always enjoyed having an expensive bottle of wine with dinner to impress his clients. This client, Mary, owns an antique import busi ...

An 18g ice cube initially at -10c is dropped into 120 g of

An 18g ice cube initially at -10C is dropped into 120 g of water initially at 25C. What is the final temperature of the system after all of the ice has melted? Use the data provided in the reference data sheet and assume ...

Q1 sodium metal is very active with water therefore

Q1. Sodium metal is very active with water. Therefore, determining the value of a block of sodium will be impossible by water displacement. On the other hand, the density of sodium metal can be found in the chemistry han ...

Sodium sulfide 117 g reacts with hydrochloric acid 167 ml

Sodium sulfide (11.7 g) reacts with hydrochloric acid (16.7 ml, 12.0 M) to yield sodium chloride and hydrogen sulfide. What is the theoretical yield (g) of hydrogen sulfide?

A 0235g sample of a solid is 925 naoh and 75 caoh2 by mass

A 0.235g sample of a solid is 92.5% NaOH and 7.5% Ca(OH)2, by mass requires 45.6mL of a HCl solution for its titration. What is HCl molarity?

Consider two acids hcn and Consider two acids HCN and HNO2:

Consider two acids HCN and HNO2: HNO2 + H2O NO2- + H3O+ Ka = 5.1 x 10-4 HCN + H2O CN- + H3O+ Ka = 2.1 x 10-9 Which of the following statements is/are true? A ...

The density of air at stp is 129gl if your stoppered

The density of air at STP is 1.29g/L. If your stoppered the250mL flask contains 242mL of water(also the volume of air it would contain), calculate the mass of air in the flask under STP.

N2o5 decomposes following first order kinetics if 75 of the

N2O5 decomposes following first order kinetics. If 75% of the original sample of N2O5 has decomposed after 2240 minutes, what is the value of k, the rate constant, at this temperature(in min-1)?

A chem major obtains a high-paying summer job and is given

A Chem major obtains a high-paying summer job and is given the task of determining the ethanol content (in vol %) of a commercial mouthwash sample. she decides to use gas chromatography because the experiment was so much ...

4,153,160 Questions Asked
13,132 Experts
2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Recent Questions

Ask Chemistry Expert