Subject thermal-dynamics consider 2 kg of an ideal gas r300, Ask an Expert

Academics

SUBJECT THERMAL-DYNAMICS Consider 2 kg of an ideal gas (R=300 J/(kg.K) and Cp=1000 J/(kgK)) contained in a piston cylinder arrangement. The cylinder has a small valve at the end opposite to the piston.The cylinder walls are not adiabatic and allow heat transfer. The initial pressure and volumeare 0.1 MPa and 2 m3. At time t=0, the gas starts leaking extremely slowly (at theconstant rate of 0.001 kg/s) through the valve (the opening of the valve can be assumed to be controlled to allow a constant leak rate) while the piston is allowed to move.

The piston can be considered frictionless. The leakage stops at t=1000s. The whole process can be considered to take place quasistatically with local equilibrium being achieved instantly within the cylinder.The pressure and temperature of the gas do not change during this process.

Part (a) what is the final volume of the gas?

(b) what is the heat transfer during the process(in joules)

(c)what is the change in the specific entropy of the gas in the cylinder J/(kgK)?

(d) what is the entropy production rate in kWK?

(e) is the process possible?

View complete question

Physics, Academics

Category:- Physics
Reference No.:- M91705415

Have any Question?Write your Review or question?

Related Questions in Physics

Question rotational kinetic energy and conservation of

Question: Rotational Kinetic Energy and Conservation of Energy Ranking Task The five objects of various masses, each denoted m, all have the same radius. They are all rolling at the same speed as they approach a curved i ...

Question part a what magnitude of force must the worker

Question: Part A: What magnitude of force must the worker apply to move the crate at constant velocity? Express your answer using two significant figures. Part B: How much work is done on the crate by this force when the ...

Problem suppose a point charge produces a potential of -18

Problem: Suppose a point charge produces a potential of -1.8 V at a distance of 1.1 mm. What is the charge, in coulumbs, of the point charge? The response must be typed, single spaced, must be in times new roman font (si ...

A projectile is launched at an angle of 120deg above the

A projectile is launched at an angle of 12.0° above the horizontal. What is its initial speed if it hits a target that is located a horizontal distance of 175 m from the launch point and 11.0 m above the launch level?

After deploying her parachute a skydiver falls through the

After deploying her parachute, a skydiver falls through the air with a constant speed of 8.00 m/s . As she falls, there is a constant breeze blowing west at 2.50 m/s. At what angle from the downward vertical does the par ...

Question the potential difference between the surface of a

Question: The potential difference between the surface of a 3.5 cmdiameter power line and a point 1.0 m distant is 3.6 kV. What is the line charge density on the power line? The response must be typed, single spaced, mus ...

Question a parallel-plate vacuum capacitor is connected to

Question: A parallel-plate vacuum capacitor is connected to a battery and charged until the stored electric energy is . The battery is removed, and then a dielectric material with dielectric constant is inserted into the ...

Question tim and rick both can run at speed vr and walk at

Question: Tim and Rick both can run at speed v_r and walk at speed v_w, with v_r > v_w They set off together on a journey of distance D. Rick walks half of the distance and runs the other half. Tim walks half of the time ...

Suppose the convention were adopted that defines w and w 0

Suppose the convention were adopted that defines W and W 0 in the first law of thermodynamics to be the "work done on the system by the surroundings." a. Write the first law with this alternate convention. b. Why do the ...

Question a proton with a rest mass m16 x 1027kg has a total

Question: A proton (with a rest mass m=1.6 x 10 27 kg) has a total energy that is 4.00 times its rest energy. What is the magnitude of the momentum p of the proton? Please explan in detail each step and what equations ar ...

4,153,160 Questions Asked
13,132 Experts
2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Recent Questions

Ask Physics Expert