Question in a mechanical coal-washing process a portion of, Ask an Expert

Academics

Question: In a mechanical coal-washing process, a portion of the inorganic !ulfur and ash material in the mined coal can be removed. A feed stream to the process consists of 73% coal, 11 % ash, 11 % sulfur, and 5.0% water (to suppress dust). The clean coal side of the process consists of 88% coal, 6.0% sulfur, 3.0% ash, and 3.0% water. The refuse side consists of 32% sulfur, with the remainder being ash, coal, and water. If 8.0(101) metric tons per hour of clean coal is required, determine the feed rate required for the mined coal and the composition of the refuse material.

View complete question

Chemistry, Academics

Category:- Chemistry
Reference No.:- M92274753

Have any Question?Write your Review or question?

Related Questions in Chemistry

Suppose 17 g of zinc is treated with 62 g of pure hydrogen

Suppose 1.7 g of zinc is treated with 6.2 g of pure hydrogen chloride. What is the maximum mass (in g) of hydrogen gas that can be produced?

What is an example of a specific transition metal solution

What is an example of a specific transition metal solution, including the oxidation state of the transition metal, and the color of the solution, and the complex ion that the transition metal forms in that solution if ap ...

At a given pressure and temperature it takes 1987 sec for a

At a given pressure and temperature, it takes 198.7 sec for a 2.6 L sample of Kr to effuse through a porous membrane. How long does it take for 2.6 L Ar to effuse under the same conditions?

What is the ph in a solution made by mixing 600ml of 00120

What is the ph in a solution made by mixing 60.0ml of 0.0120 Ba(OH)2 with 20.0 mL of 0.0500M acetic acid?

What will happen if i decide to test the solubility of

What will happen if I decide to test the solubility of sodium chloride in ethanol which is less polar than water.

A sample of cobalt ii chloride hydrate starts with a mass

A sample of cobalt (II) chloride hydrate starts with a mass of 3.35 g. After heating, the sample mass is 1.83 g. What is the molar ratio of water to cobalt chloride? What is the correct chemical formula

Consider the following reactiona gnbspnbspb grarrc

Consider the following reaction. A (g) + B (g) → C (g) + D (g) *In one experiment the concentration of A (g) was monitored in the presence of a large excess of B (g) ( [B] o = 0.750 M ) . Time (s) [A] (mol/L) 0.00 6.00 ...

For the equilibrium2ibrgi2gbr2gnbspkp85times10-3 at 150

For the equilibrium 2IBr( g )?I2( g )+Br2( g ) Kp =8.5×10-3 at 150 °C. Part A: If 2.7×10-2 atm of IBr is placed in a 2.0-L container, what is the partial pressure of IBr after equilibrium is reached? Express your answer ...

A saturated solution of sroh2aq at 25 degrees celcius has

A saturated solution of Sr(OH)2(aq) at 25 degrees Celcius has measured a pH of 13.5. Estimate the solubility of Sr(OH)2(aq) in water at 25 degrees Celsius

You are required to read the following case study and

You are required to read the following case study and prepare a Project Feasibility Study and Timeline based on the information contained in the case study. Residential Duplex Development Project You own a real estate ...

4,153,160 Questions Asked
13,132 Experts
2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Recent Questions

Ask Chemistry Expert