Question an aisi 1045 steel tie rod 24 ft long and 1 in in, Ask an Expert

Academics

Question: An AISI 1045 steel tie rod 24 ft long and 1 in in diameter is used to tie together two walls of a building. The rod is screwed up to a tension of 9000 lb. What will be the stress in the rod if the temperature rises 30°F? If it falls 30°F? The response must be typed, single spaced, must be in times new roman font (size 12) and must follow the APA format.

View complete question

Physics, Academics

Category:- Physics
Reference No.:- M92578183

Have any Question?Write your Review or question?

Related Questions in Physics

Question a roller coaster car is going over the top of a

Question: A roller coaster car is going over the top of a 12-m-radius circular rise. At the top of the hill, the passengers "feel light," with an apparent weight only 60% of their true weight. How fast is the coaster mov ...

Question what is the spacing in mm between the slitslight

Question: What is the spacing (in mm) between the slits? Light from a helium-neon laser (? = 633 nm) is used to illuminate two narrow slits. The interference pattern is observed on a screen3.3m behind the slits. Eleven b ...

Question a soap bubble is essentially a thin film of water

Question: A soap bubble is essentially a thin film of water surrounded by air. The colors you see in soap bubbles are produced by interference. What visible wavelengths of light are strongly reflected from a 390 nm -thic ...

Initially at time t 0 a particle is moving vertically at 5

Initially (at time t = 0) a particle is moving vertically at 5 m/s and horizontally at 0 m/s. Its horizontal acceleration is 1.6 m/s2. At what time will the particle be traveling at 57? with respect to the horizontal? Th ...

Question problem during a very quick stop a car decelerates

Question: Problem: During a very quick stop, a car decelerates at 7.2 m/s2. Assume the forward motion of the car corresponds to a positive direction for the rotation of the tires (and that they do not slip on the pavemen ...

Problem suppose a point charge produces a potential of -18

Problem: Suppose a point charge produces a potential of -1.8 V at a distance of 1.1 mm. What is the charge, in coulumbs, of the point charge? The response must be typed, single spaced, must be in times new roman font (si ...

An ideal gas of molecules of mass 33 x 10 -27kg is at

An ideal gas of molecules (of mass 3.3 x 10 -27kg) is at temperature 400 K and density 0.1 kg/m3. The gas is confined within a cube of side length 2 m. What is magnitude of the average force experienced by one of the wal ...

A 0900 kg hammer is moving horizontally at 950 ms when it

A 0.900 kg hammer is moving horizontally at 9.50 m/s when it strikes a nail and comes to rest after driving it 1.00 cm into a board. Calculate the duration of the impact. (s) What was the average force exerted on the nai ...

Question the starter motor of a car engine draws a current

Question: The starter motor of a car engine draws a current of 170 A from the battery. The copper wire to the motor is 5.80 mm in diameter and 1.2 m long. The starter motor runs for 0.670 s until the car engine starts. A ...

1 evaluate 50000 107380 10-16 report 2 decimals for

1) Evaluate (5.0000 * 10^7)(3.80 * 10^-16). Report 2 decimals for result 2) 1,400 kg car moving at 7.0 m/s is stopped by action of it braces. The work done by the car braces is .....Joules. Response in 2 decimals. 3) The ...

4,153,160 Questions Asked
13,132 Experts
2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Recent Questions

Ask Physics Expert