One method used to store energy during times of low demand, Ask an Expert

Academics

One method used to store energy during times of low demand is by pumping water uphill into a reservoir. When energy demand exceeds the output produced by power plants, the water is released, moves downhill, and is converted into electricity by a turbine. During a 142.0 minute long period of low usage, 62.0 MW is used to pump water up an elevation of 56.7 m in a series of 1.00 m diameter pipes. The friction loss in the pipe going to the upper reservoir is 30.2 m2/s2.

What is the mass flow rate, , of water during the low usage period?

What is the total mass of water raised 56.7 m during this 142.0 minute period?

How long can the turbines produce 335.0 MW of power from the release of the mass of stored water calculated above? Assume the water sustains a friction loss of 30.2 m2/s2 on the way down to the turbine.
What is the efficiency of this process? (Assume that the pump and tubines operate at 100% efficiency, and the only loses are due to frictional loses within the pipes.)

View complete question

Chemistry, Academics

Category:- Chemistry
Reference No.:- M9784592

Have any Question?Write your Review or question?

Related Questions in Chemistry

A compound contains only carbon hydrogen and oxygen

A compound contains only carbon, hydrogen, and oxygen. Combustion of 10.68 mg of the compound yields 15.48 mg CO2 and 7.39 mg H2O. The molar mass of the compound is 182.2 g/mol. What are the empirical and molecular formu ...

Why would the fact that red blood cells are malformed cause

Why would the fact that red blood cells are malformed cause a problem with their ability to carry oxygen? How would this affect a person stricken with this disease?

Calculate the volume of 60m naoh solution that you would

Calculate the volume of 6.0M NaOH solution that you would need to prepare 500mL of a .15M NaOH solution. (formula weight of NaOH = 40.00g/m)

Suppose a tank is filled with a2g so that initial pressure

Suppose a tank is filled with A2(g) so that initial pressure is 0.8688 atm at temperature of 298K. Some of the A2(g) dissociates and when the system reaches equlibrium the total pressure in the tank is 1.275 atm. Calcula ...

When 356 g of an unknown hydrocarbon was dissolved in 125 g

When 3.56 g of an unknown hydrocarbon was dissolved in 125 g of benzene, the freezing pointof the solution was found to be 4.41oC. Analysis of thehydrocarbon showed that it contained 93.71% carbon (by mass) and6.29% hydr ...

Assessmenttaskyou have been tasked to prepare a report for

Assessment Task You have been tasked to prepare a report for potential investors that allows them to understand the potential social, ethical and legal opportunities and risks of a technology, selected from a list of top ...

202 g of an unknown molecular solute is dissolved in 565

20.2 g of an unknown molecular solute is dissolved in 5.65 moles of aniline (C6H5NH2), causing the boiling point of aniline to increase by 3.79 °C. Calculate the molar mass of the solute. For aniline, the molar mass is 9 ...

2 h2sg 3 o2g rarr 2 h2og 2 so2gusing standard enthalpies

2 H2S(g) + 3 O2(g) → 2 H2O(g) + 2 SO2(g) Using standard enthalpies of formation, calculate the standard enthalpy change for this reaction.

H2g i2g 2hitemperature 731 kif 160 mol h2nbspand 420 mol

H 2 (g) + I 2 (g) = 2HI Temperature = 731 K If 1.60 mol H 2 and 4.20 mol I 2 areplaced in a 1.08 L vessel What is the equilibrium concentration of H 2 in the gaseous mixture? The equilibrium constant is K = 49.7

Calculate the volume in milliliters of anbsp18 moll ironii

Calculate the volume in milliliters of a 1.8 mol/L iron(II) bromide solution that contains 150.g of iron(II) bromide FeBr2. Round your answer to 2 significant digits.

4,153,160 Questions Asked
13,132 Experts
2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Recent Questions

Ask Chemistry Expert