(Answered) Methanol is synthesized from carbon monoxide and hydrogen

Academics

Methanol is synthesized from carbon monoxide and hydrogen in a catalytic reactor.

The fresh feed to the process contains 32.0 mol% CO, 64.0 mol% H₂and 4.00 mol% N₂. This stream is mixed with a recycle stream in a ratio of 10.00 mol recycle / 1 mol fresh feed to produce the feed to the reactor, which contains 10.0 mol% N₂.

The reactor effluent goes to a condenser from which two streams emerge: a liquid product stream containing essentially all of the methanol formed in the reactor, and a gas stream containing all of the CO, H₂, and N₂ leaving the reactor.

The gas stream is split into two fractions; one is removed from the process as a purge stream, and the other is the recycle stream that combines with the fresh feed to the reactor.

For a methanol production rate of 100.0 mol/h, calculate the fresh feed rate (mol/h), the molar flow rate and composition of the purge gas, and the overall and single-pass conversions.

View complete question

Chemistry, Academics

Category:- Chemistry
Reference No.:- M91873833
Price:- $25

Verified Expert

Priced at $50 Now at $25, Verified Solution

Have any Question?Write your Review or question?

Related Questions in Chemistry

Q1 sodium metal is very active with water therefore

Q1. Sodium metal is very active with water. Therefore, determining the value of a block of sodium will be impossible by water displacement. On the other hand, the density of sodium metal can be found in the chemistry han ...

A paint contains 1800 ppm lead approximately what mass of

A paint contains 180.0 ppm lead. Approximately what mass of lead will be in 1.00 cm ^3 of this paint when 1.00 gal is uniformly applied to 445.0 ft 2 of a wall. The density of the paint is 8.00 lb/gal.

A chemist must preparenbsp725 ml ofnbsp275 mm aqueous

A chemist must prepare 725. mL of 275. mM aqueous copper(II) sulfate CuSO4 working solution. He'll do this by pouring out some 0.316 M aqueous copper(II) sulfate stock solution into a graduated cylinder and diluting it w ...

The common charges of an element can be related to the

The common charges of an element can be related to the electron configuration of the element. Why would copper ions have 2 common charges? Explain each of them in terms of the electron configuration.

Ironiii oxide reacts with carbon monoxide according to the

Iron(III) oxide reacts with carbon monoxide according to the equation: Fe2O3(s)+3CO(g)→2Fe(s)+3CO2(g) A reaction mixture initially contains 22.15 g Fe2O3 and 15.98 g CO. Once the reaction has occurred as completely as po ...

While heating your copper sulfur mixture the original

While heating your copper sulfur mixture the original crucible lid fell and was broken. You replace the lid with another one. You used the mass of the original lid in your calculations. However the mass of the second lid ...

Calculate the boling point of a solution prepared by adding

Calculate the boling point of a solution prepared by adding 11.5 g naphthalene (C10H8) to 250.0 g of benzene. Naphthalene is a non-electrolyte solute, and benzene is an organic solvent that exhibits a boiling point of 80 ...

A solution is made by mixing 300ml of 0240m nh3aq with

A solution is made by mixing 30.0ml of 0.240M NH3(aq) with 30.0ml of 0.240 M hydrochloric acid. What is (Are) the principal species and their molarities in the resulting solution? What is the PH of the solution?

If 0050 mol hydrochloric acid hcl is mixed with 0050 mol of

If 0.050 mol hydrochloric acid (HCl) is mixed with 0.050 mol of sodium hydroxide (NaOH) in a "coffee cup" calorimeter, calculate the temperature change of 34.6 g of the resulting solution if the specific heat of the solu ...

Name five types of radiation describe in table form their

Name five types of radiation. Describe, in table form, their mass number, charge, and identity.

4,153,160 Questions Asked
13,132 Experts
2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Recent Questions

Ask Chemistry Expert