Ask Question, Ask an Expert

+1-415-315-9853

info@mywordsolution.com

Ask Chemistry Expert

problem 1: Illustrate the term soil colloids? prepare the ion exchange properties of the soils.

problem 2: How do you analyze total nitrogen content in soil?

problem 3: describe the effects of organic pollutants and particulate matter on the atmosphere.

problem 4: How can you analyze the ozone in Air samples?

problem 5: Describe the sources and effects of the Thermal pollution.

problem 6: Describe the effects of hydrocarbons with regard to water pollution.

problem 7: Describe the methods of monitoring of sulphur dioxide in case of water pollutions.

problem 8: Describe the water treatment by reverse osmosis technique.

Chemistry, Academics

  • Category:- Chemistry
  • Reference No.:- M95063

Have any Question? 


Related Questions in Chemistry

Assuming that air is 210 percent oxygen by volume what

Assuming that air is 21.0 percent oxygen by volume, what volume of air in liters at 45.0 °C and 793 mmHg would be required to burn 185 g of ethanol (C 2 H 5 OH)?

Explain how bacteria are intimately involved in the

Explain how bacteria are intimately involved in the generation of acidic mine waters

Identify the chemical components and the proportions

Identify the chemical components and the proportions necessary to achieve a buffer with the desired pH. Include relevant calculations in your answer.

What is the maximum mass in grams of aluminum chloride that

What is the maximum mass in grams of aluminum chloride that could be obtained from 2.50 mol of barium chloride and excess aluminum sulfate? This is the balanced equation for the reaction: Al 2 (SO 4 ) 3 + 3BaCl 2 --> 3Ba ...

The elements of 3d transition series are given assc ti v cr

the elements of 3d transition series are given as:sc, ti, v, cr, Mn, fe, Coanswer the following: (a) write the element which shows max. no. of oxidation states.why? (b)which element has highest M.P (c) which elements is ...

Consider a 065 m column with van deemter parameters a022 mm

Consider a 0.65 m column with van Deemter parameters A=0.22 mm, B=21.7 mm mL/min, and C=0.018 mm min/mL. If it takes at least 85 theoretical plates to fully separate two solutes, what range of flow rates can be used to s ...

Question 1 - state why the second part of each statement is

Question 1 - State why the second part of each statement is incorrect and correct it. a)      Ammonium phosphate is (NH 3 ) 4 PO 4 b)      Ammonium hydroxide is ALOH 3 c)       Cr(NO 3 ) 3 is chromic(ii) chloride d)      ...

Write a reserch paper on gas chromatographythis is a 10

Write a reserch paper on Gas chromatography. This is a 10 pages research paper that should include an introduction on chromatography, principles of separation, type of columns, resolution, detection methods and applicati ...

A 1000l tank at 89degc is filled with 786g of boron

A 10.00L tank at 8.9°C is filled with 7.86g of boron trifluoride gas and 7.09g of dinitrogen difluoride gas. You can assume both gases behave as ideal gases under these conditions. Calculate the mole fraction of each gas ...

What is the volume occupied by 291 g of argon gas at a

What is the volume occupied by 29.1 g of argon gas at a pressure of 1.23 atm and a temperature of 399 K?

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Section onea in an atwood machine suppose two objects of

SECTION ONE (a) In an Atwood Machine, suppose two objects of unequal mass are hung vertically over a frictionless

Part 1you work in hr for a company that operates a factory

Part 1: You work in HR for a company that operates a factory manufacturing fiberglass. There are several hundred empl

Details on advanced accounting paperthis paper is intended

DETAILS ON ADVANCED ACCOUNTING PAPER This paper is intended for students to apply the theoretical knowledge around ac

Create a provider database and related reports and queries

Create a provider database and related reports and queries to capture contact information for potential PC component pro

Describe what you learned about the impact of economic

Describe what you learned about the impact of economic, social, and demographic trends affecting the US labor environmen