Ask Question, Ask an Expert

+1-415-315-9853

info@mywordsolution.com

Ask Physics Expert

Q1. Describe the roles of fillers, plasticizers and stabilizers in polymer processing.

Q2. A sphere of 100 mm diameter is to be coated with the chromium from a solution having chromium in the six valent (hexavalent) state.  How much time would be required to produce a coating 20 µm thick if:

a) Current is 20 A.

b) The cathodic efficiency is 15%.

Atomic weight and density of chromium are 52 and 7.2 gcm–3 correspondingly.

Physics, Academics

  • Category:- Physics
  • Reference No.:- M99887

Have any Question? 


Related Questions in Physics

The accurate metal work functions are recently determined

The accurate metal work functions are recently determined using the inverse problem of Problem, that is, if NDD is known precisely, the metal work function can  be calculated form the experimental forward I-V curve of th ...

Design a wilkinson power divider with a power division

Design a Wilkinson power divider with a power division ratio of P3/P2 = 1/3 and a source impedance of 50 Ohm.

1 show by elementary integration that the net steady-state

1. Show by elementary integration that the net steady-state volume generation-recombination rate of electrons (or holes) in a volume element dxdydz is given by the net electron current flowing out of the volume element. ...

1 identify two primitive and two non-primitive cells of a

1. Identify two primitive and two non-primitive cells of a two-dimensional face-centered square lattice. Give the primitive unit vector and draw it on the figure. Is this a primitive lattice or a composite of two simple ...

1 the deepest known point in the ocean is 11034 m in the

1. The deepest known point in the ocean is 11,034 m in the Mariana Trench in the Pacific. Assuming sea water to have a constant density of 1050 kg/m 3 , determine the pressure at this point in atmospheres. 2. Determine t ...

In a stripping process for the removal of tca from

In a stripping process for the removal of TCA from wastewater (very dilute, 50 mg TCA/L), air is bubbled into the water to transfer the TCA from the liquid phase to the gas phase. This process is carried out at 20°C and ...

What is the magnitude of the temperature

What is the magnitude of the temperature change |ΔT|= 12.6 K in degrees Fahrenheit?

A 150-kg block of ice at 000degc falls into lake superior

A 15.0-kg block of ice at 0.00°C falls into Lake Superior, which is a fresh water lake. The lake water is at 10.0°C, and the latent heat of fusion for ice is 3.34 × 10 5 J/kg. Find the change in entropy of the block of i ...

Bullets of mass22g are fired in parallel paths with speeds

Bullets of mass2.2g are fired in parallel paths with speeds of216m/s through a hole2.0mm in diameter. How far from the hole must you be to detect a1.4cm diameter spread in the beam of bullets?

What is karma-yoga does this practice eliminate suffering

What is karma-yoga? Does this practice eliminate suffering and evil or teach indifference towards it?

  • 4,153,160 Questions Asked
  • 13,132 Experts
  • 2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Section onea in an atwood machine suppose two objects of

SECTION ONE (a) In an Atwood Machine, suppose two objects of unequal mass are hung vertically over a frictionless

Part 1you work in hr for a company that operates a factory

Part 1: You work in HR for a company that operates a factory manufacturing fiberglass. There are several hundred empl

Details on advanced accounting paperthis paper is intended

DETAILS ON ADVANCED ACCOUNTING PAPER This paper is intended for students to apply the theoretical knowledge around ac

Create a provider database and related reports and queries

Create a provider database and related reports and queries to capture contact information for potential PC component pro

Describe what you learned about the impact of economic

Describe what you learned about the impact of economic, social, and demographic trends affecting the US labor environmen