(Answered) Bull hydraulic pistonthe basic design of any hydraulic

Academics

• Hydraulic Piston.

The basic design of any hydraulic system is two connected fluid-filled cylinders of different cross-sectional area. Each cylinder is fitted with a close-fitting piston. Ideally, the fluid is incompressible and the container does not expand, so that when one piston is compressed, it expels a volume of fluid from its cylinder and exactly the same volume of fluid flows into the other cylinder, lifting its piston.

Your task is to design a hydraulic system. It must be able to lift a load of 3.0 metric tons using an input force of no more than 100 N. The pressure of the hydraulic fluid in the system must not exceed 10.0 bar during this lift. What should be the minimum diameters of the input and output pistons?

1 metric ton = 1000 kg; 1 bar = 100,000 Pa.

View complete question

Physics, Academics

Category:- Physics
Reference No.:- M91626576
Price:- $10

Verified Expert

Priced at $20 Now at $10, Verified Solution

Have any Question?Write your Review or question?

Related Questions in Physics

Question a standard 100 w 120 v lightbulb contains a

Question: A standard 100 W (120 V) lightbulb contains a 7.0-cm-long tungsten filament. The high-temperature resistivity of tungsten is 9.0 x 107m. What is the diameter of the filament? The response must be typed, single ...

Question a rock climber stands on top of a 60 m high cliff

Question: A rock climber stands on top of a 60 m high cliff hanger a pool of water. He throws two stones vertically downward 1.0 s apart and observes that they cause a single splash. The initial speed of the first stone ...

Three people are fighting over a book the mass of the

Three people are fighting over a book. The mass of the book is m=9.18kg. Each person exerts a force on the book, F. The angle between the first person and the second person's force is 125.9 degrees. If the first person i ...

Question a proton moves along the x-axis with vx10 x 107msa

Question: A proton moves along the x-axis with vx=1.0 x 10 7 m/s. a) As it passes the origin, what are the strength and direction of the magnetic field at the (1 cm, 0 cm, 0 cm) position? Give your answer using unit vect ...

Question pennies today are copper-covered zinc but older

Question: Pennies today are copper-covered zinc, but older pennies are 3.1 g of solid copper. What are the total positive charge and total negative charge in a solid copper penny that is electrically neutral?The density ...

The ball was thrown from 190 m height building the initial

The ball was thrown from 19.0 m height building. The Initial velocity is 39.2 M/S and it creates 30 degree angel with the horizontal surface.. Find the Max height the ball can reach, range and velocity before it hits the ...

A 78 g basketball is launched at an angle of 448 and a

A 78 g basketball is launched at an angle of 44.8? and a distance of 15.9 m from the basketball goal. The ball is released at the same height (ten feet) as the basketball goal's height. A basketball player tries to make ...

Question your physics textbook is sliding to the right

Question: Your physics textbook is sliding to the right across the table. Identify all forces acting on the object: A) Weight, Kinetic friction B) Thrust; Kinetic friction C) Normal force ; Weight ; Kinetic friction ; D) ...

Problem suppose a point charge produces a potential of -18

Problem: Suppose a point charge produces a potential of -1.8 V at a distance of 1.1 mm. What is the charge, in coulumbs, of the point charge? The response must be typed, single spaced, must be in times new roman font (si ...

Question a satellite orbiting the moon very near the

Question: A satellite orbiting the moon very near the surface has a period of 110 min, What is free-fall acceleration on the surface of the moon? The response must be typed, single spaced, must be in times new roman font ...

4,153,160 Questions Asked
13,132 Experts
2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Recent Questions

Ask Physics Expert