A sensitive beam balancethe materials required for this, Ask an Expert

Academics

A sensitive beam balance

The materials required for this balance contain a clothes peg, a knitting needle about 12 in. long, two pins or needles and a support like as a milk bottle or preserving jar.

The beam of the balance is made by passing the knitting needle through the hole in the spring of the clothes peg. The pivots for the beam are the two needles or pins placed one on either side of the clothes peg, slightly below the hole by which the knitting needle passes. The latter must project equally on either side of the clothes peg, and can be wedged in this position inside the springy a little splinter of wood.

View complete question

Physics, Academics

Category:- Physics
Reference No.:- M9546635

Have any Question?Write your Review or question?

Related Questions in Physics

Question in one of the classic nuclear physics experiments

Question: In one of the classic nuclear physics experiments at the beginning of the 20th century, an alpha particle was accelerated towards a gold nucleus and its path was substantially deflected by the Coulomb interacti ...

Problem a student knows that an ambulance siren has a

Problem: A student knows that an ambulance siren has a frequency of fs = 393 Hz. He measures, when the ambulance is approaching him, the frequency fo = 415. Assume the speed of sound is 343 m/s in this problem. Randomize ...

You throw two balls of equal masses m0992 kg vertically

You throw two balls of equal masses ( m =0.992 kg) vertically upward at an interval of Δ t = 1.41 seconds with the same initial speed of v i=35.3 m/s from the same height. At what height will they collide, measured rel ...

Propane boilers are a common technology for domestic

Propane boilers are a common technology for domestic heating, and have a typical energy efficiency of 90%. The chemical formula of propane is C 3 H 8 , its lower heating value is 50,400 kJ/kg, and its carbon content by m ...

In raising a 6400-n piano with a pulley system the movers

In raising a 6400-N piano with a pulley system, the movers note that, for every 3.0 m of rope pulled down, the piano rises 0.26 m Ideally, find the force required to lift the piano. Express your answer to two significant ...

Question a particle moving along the y-axis has the

Question: A particle moving along the y-axis has the potential energy U = 4y^3J, where y is in m. A) Graph the potential energy from y=0m to y=2m. B) What is the y-component of the force on the particle at y=0m? C) What ...

The first modern olympics of 1896 had a marathon distance

The first modern Olympics of 1896 had a marathon distance of 40 km. In 1908, for the Olympic marathon in London, the length was set at 42.195 km to provide the Royal Family with a better view of the race. Other distances ...

Question suppose you have a fixed charge of -150 nc at

Question: Suppose you have a fixed charge of -15.0 nC at point X. Points A and B are to the right of point X at distances of 20.0 cm and 40.0 cm from X respectively. Calculate the following: a) the potential at points A ...

Question a thin horizontal 20-cm-diameter copper plate is

Question: A thin, horizontal, 20-cm-diameter copper plate is charged to 4.0 nC . Assume that the electrons are uniformly distributed on the surface a) What is the strength of the electric field 0.1 mm above the center of ...

Question a proton with an initial speed of 800000 ms is

Question: A proton with an initial speed of 800000 m/s is brought to rest by an electric field. Part A- Did the proton move into a region of higher potential or lower potential? Part B - What was the potential difference ...

4,153,160 Questions Asked
13,132 Experts
2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Recent Questions

Ask Physics Expert