A nuclear power plant generates 2000 mw of heat energy from, Ask an Expert

Academics

find out maximum possible thermal efficiency and actual efficiency of a nuclear power plant.

A nuclear power plant generates 2000 MW of heat energy from nuclear reactions in the reactor's core. This energy is used to boil water and produce high-pressure steam at 300 C. The steam spins a turbine, which produces 700 MW of electric power, then the steam is condensed and the water is cooled to 3 ⁰C before starting the cycle again.

1. What is the maximum likely thermal efficiency of the power plant?

2. What is the plant's actual efficiency.

View complete question

Physics, Academics

Category:- Physics
Reference No.:- M917396

Have any Question?Write your Review or question?

Related Questions in Physics

Question a standard biological microscope is required to

Question: A standard biological microscope is required to have a magnification of 200Ã-. When paired with a 10Ã- eyepiece, what power objective is needed to get this magnification? Part A: Assume that the length of the t ...

Question this problem concerns the properties of circular

Question: This problem concerns the properties of circular orbits for a satellite of mass m orbiting a planet of mass M in an almost circular orbit of radius r. In doing this problem, you are to assume that the planet ha ...

What is the ideal speed to take a 80 m radius curve banked

What is the ideal speed to take a 80 m radius curve banked at a 30.0° angle?

A projectile is launched at an angle of 120deg above the

A projectile is launched at an angle of 12.0° above the horizontal. What is its initial speed if it hits a target that is located a horizontal distance of 175 m from the launch point and 11.0 m above the launch level?

The amount of chemical energy released in burning heating

The amount of chemical energy released in burning heating oil is approximately 130 MJ per gallon. This is the amount of energy released as heat during combustion. (a) Suppose that during the winter, heating a home with o ...

Question the position of a mass oscillating on a spring is

Question: The position of a mass oscillating on a spring is given byx = (6.8 cm) cos[2t/(0.91 s)]. (a) What is the frequency of this motion? (b) When is the mass first at the position x =-6.8cm? The response must be type ...

Question the position of a particle moving along an x axis

Question: The position of a particle moving along an x axis is given by x = 14.0t2 - 3.00t3, where x is in meters and t is in seconds. Determine (a) the position, (b) the velocity, and (c) the acceleration of the particl ...

Problem sophia exerts a steady 50-nnbsphorizontal force on

Problem: Sophia exerts a steady 50-N horizontal force on a 8.6-kg box resting on a lab bench. The box slides against a horizontal friction force of 27 N Part A Find the box acceleration. Express your answer to two signi ...

Question at one point in a pipeline the waters speed is 300

Question: At one point in a pipeline the water's speed is 3.00 m/s and the gauge pressure is 5.00 x 10 4 Pa. Find the gauge pressure at a second point in the line, 11.0 m lower than the first, if the pipe diameter at the ...

Question a simple wheel has the form of a solid cylinder of

Question: A simple wheel has the form of a solid cylinder of radius r with a mass m uniformly distributed throughout its volume. The wheel is pivoted on a stationary axle through the axis of the cylinder and rotates abou ...

4,153,160 Questions Asked
13,132 Experts
2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Recent Questions

Ask Physics Expert