A mixture of gaseous carbon disulfide and excess oxygen is, Ask an Expert

Academics

A mixture of gaseous carbon disulfide and excess oxygen is placed in a 9.50 L reaction vessel at 100.0°C and a pressure of 3.25 bar. A spark causes the carbon disulfide to ignite. The complete consumption of carbon disulfide leads to the production of gaseous carbon dioxide and sulfur dioxide. After the reaction, the system is allowed to re-equilibrate at 100.0°C, and the pressure of the mixture of three gases is found to have a pressure of 2.75 bar. What is the partial pressure of each gas in the product mixture?

View complete question

Chemistry, Academics

Category:- Chemistry
Reference No.:- M91042700

Have any Question?Write your Review or question?

Related Questions in Chemistry

A scuba diver creates a spherical bubble with a radius of

A scuba diver creates a spherical bubble with a radius of 2.5 cm at a depth of 30.0 m where the total pressure (including atmospheric pressure) is 4.00 atm. What is the radius of the bubble when it reaches the surface of ...

A sealed vessel contains a gaseous mixture of h2 and excess

A sealed vessel contains a gaseous mixture of H2 and excess O2. The mixture is at 500 K and has a total pressure of 140 kPa. After all of the hydrogen is reacted, the total pressure of the system measured at the same tem ...

Aqueous potassium phosphate was mixed with aqueous

Aqueous potassium phosphate was mixed with aqueous magnesium chloride, and a crystallized magnesium phosphate product was formed. Consider the other product and its phase, and then write the balanced molecular equation f ...

A hydrogen atom emits a photon as its electron changes from

A hydrogen atom emits a photon as its electron changes from n = 5 to n = 2. For the H atom, E n = -2.18E-18*(1/n 2 ) J. What is the wavelength (in m) of the photon? ( ) m The number of significant digits is set to 3; t ...

The combustion of naphthalene c10h8 which releases 51501

The combustion of naphthalene (C 10 H 8 ), which releases 5150.1 kJ/mol, is often used to calibrate calorimeters. A 1.05 - g sample of naphthalene is burned in a calorimeter, producting a temperature rise of 3.86 degrees ...

The following sequence of reactions occurs in the

The following sequence of reactions occurs in the commercial production of aqueous nitcric acid: 4NH3(g)+ 5O2(g) -> 4NO2 (g) + 6H2O(l) ΔH = -907 kJ 2NO(g) + O2(g) ? 2NO2(g) ΔH= -113 kJ 3NO2 + H2O(l) -> 2HNO3(aq) + NO(g) ...

You will have a 500ml solution of salt water from this you

You will have a 500mL solution of salt water. From this you will take 10.0mL and place it on a balance. You find that the 10.0mL solution has a mass of 12.5 g. What is the density of the 500mL of salt water solution in g ...

Consider two acids hcn and Consider two acids HCN and HNO2:

Consider two acids HCN and HNO2: HNO2 + H2O NO2- + H3O+ Ka = 5.1 x 10-4 HCN + H2O CN- + H3O+ Ka = 2.1 x 10-9 Which of the following statements is/are true? A ...

A chemist must preparenbsp450 mlnbspofnbsp130 mm aqueous

A chemist must prepare 450. mL of 130. mM aqueous aluminum sulfate (Al2(SO4)3) working solution. He'll by pouring out some 0.452 mol/L aqueous aluminum sulfate stock solution into a graduated cylinder and diluting it wit ...

Sodium sulfide 117 g reacts with hydrochloric acid 167 ml

Sodium sulfide (11.7 g) reacts with hydrochloric acid (16.7 ml, 12.0 M) to yield sodium chloride and hydrogen sulfide. What is the theoretical yield (g) of hydrogen sulfide?

4,153,160 Questions Asked
13,132 Experts
2,558,936 Questions Answered

Ask Experts for help!!

Looking for Assignment Help?

Start excelling in your Courses, Get help with Assignment

Write us your full requirement for evaluation and you will receive response within 20 minutes turnaround time.

Ask Now Help with Problems, Get a Best Answer

Recent Questions

Ask Chemistry Expert